What size is a Honda Big Red?
The Big Red is a bit larger than some of it’s competition at 114.7″ long and 64.0″ inches wide. With the larger wheel base the Big Red can haul some serious cargo, 1,000 lbs. in the bed and 1,500 lbs. towing capacity.
What years did Honda make the Big Red?
ATC200E “Big Red” – Produced in 1983–1984, this ATC is equipped with a 192cc 4-Stroke Air-cooled OHV engine, to a 5-speed Dual-range Auto-clutch transmission and Chain final drive.
How much does a 1985 Honda Big Red weigh?
1985 ATC250ES Specifications
| General Specs | |
|---|---|
| Seat Height | 705 mm (27.8 in) |
| Wheelbase | 1237 mm (48.7 in) |
| Ground Clearance | 165 mm (6.5 in) |
| Dry Weight | 184 kg (405.7 lb) |
How much did a Honda Big Red cost new?
During its launch, the suggested retail price for the Honda Big Red 3 Wheeler was $1,648 for the ATC 200 and $1,848 for the 200E/ES. At present, this trike’s cost could range from $110 to $1,830, depending on whether the vehicle was well-taken care of or not.
What was the year of the Honda Big Red 3 Wheeler?
1984 Honda Big Red Three Wheeler Journeyman83 restored a 1984 Big Red and has replaced his (front and rear) brake pads and cables, tires, pull start and rope, snap-on headlights, and changed both his front and rear racks with sturdier bed liners.
How big are the wheels on a 1985 Honda atc250es?
Honda ATC250ES Big Red 1985, G3 Series Rear ATV/UTV Dual Beadlock Wheel by Douglas Wheel®. Wheels Size: 9″ x 9″. Bolt Pattern: 4 x 110mm. An evolution of the Championship Winning G2 ATV Race wheel. New for 2017 with Matte Black Finish,… Honda ATC250ES Big Red 1985, C829 Tires by CST®. 1 Piece. Tire Size: 25 x 12-9″. Tire Construction: Radial.
What’s the dry weight of a Honda Big Red?
Dry weight is 342 lbs. (These specifications are specific to the 200ES model, which is slightly more substantial compared to the 200 version) Exterior – It is composed of a steel frame and red plastic body material that is durable and gives it its distinct moniker.
What did journeyman83 do to his Honda Big Red?
Journeyman83 restored a 1984 Big Red and has replaced his (front and rear) brake pads and cables, tires, pull start and rope, snap-on headlights, and changed both his front and rear racks with sturdier bed liners. He got a new muffler put in and repainted the head black for a slicker look.
Honda ATC250ES Big Red 1985, G3 Series Rear ATV/UTV Dual Beadlock Wheel by Douglas Wheel®. Wheels Size: 9″ x 9″. Bolt Pattern: 4 x 110mm. An evolution of the Championship Winning G2 ATV Race wheel. New for 2017 with Matte Black Finish,… Honda ATC250ES Big Red 1985, C829 Tires by CST®. 1 Piece. Tire Size: 25 x 12-9″. Tire Construction: Radial.
What kind of tires do I need for a Honda ATV?
The right tyre sizes (height, width, diameter of rim) and wheel sizes guide (with bolt pattern, and wheel offset) for Honda ATVs and UTVs. Find your four-wheeler model below in the chart (use Jump Menu for easy navigation).
Is the ATC185 series of 3wheelers interchangeable?
A little known fact, the various crank shaft variations, cylinders, pistons and heads can be interchanged with enough research, in which the right combination can result in quite the performance increase! The ATC185 series also greatly expanded the ATC’s popularity as a utility machine.
Where is the serial number on a Honda Big Red?
Frame Serial Number : located on steering head right side. TB05E-6000001 and up NOTE: This information is provided FOR REFERENCE ONLY .