What is Chevron ATF MD 3?
Chevron Automatic Transmission Fluid MD-3 is designed for use in most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes requiring a high performance, multi-purpose, power transmission fluid.It is recommended for applications that call for the former DEXRON-III H, MERCON, and …
What is synthetic transmission fluid made of?
Modern ATF consists of a base oil plus an additive package containing a wide variety of chemical compounds intended to provide the required properties of a particular ATF specification.
What is the composition of ATF?
The present invention provides for a lubricating composition including: a hydrocracker-derived, highly naphthenic, low viscosity index mineral oil; from about 2 wt. % to about 14 wt. % of at least one polymethacrylate polymer; and from about 2 wt. % to about 14 wt.
Is automatic transmission fluid hazardous?
Inhalation: Not expected to be harmful if inhaled. Contains a petroleum-based mineral oil. May cause respiratory irritation or other pulmonary effects following prolonged or repeated inhalation of oil mist at airborne levels above the recommended mineral oil mist exposure limit.
Is dexron 3 a md3?
CHEVRON ATF MD3 is a passenger car and light truck automatic transmission fluid for most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes requiring a high-performance, multi-purpose, power transmission fluid….Specifications.
| SKU | CHATFDEX |
|---|---|
| Spec | DEXRON-III H, MERCON, Allison C-4 |
Is it bad to inhale transmission fluid?
Inhalation : No known significant effects or critical hazards. Skin contact Ingestion Inhalation Adverse symptoms may include the following: respiratory tract irritation, coughing. No known significant effects or critical hazards.
What is the flash point of automatic transmission fluid?
| Fluids | Flashpoint [12] oF | Autoignition Temperature [13] oF |
|---|---|---|
| Automatic Trans. Fluid [ 2, 4] | 302-383 | 410-417 |
| Brake Fluid [ 2, 4, 10, 11] | 210-375 | 540-675 |
| Compressor Oil ( PAG and ester) [ 4, 8] | 392-500 | 410-714 |
| Coolant |
Should you use synthetic transmission?
Because of superior engineering, the synthetic fluid is better at lubricating your transmission and is able to sustain its viscosity in a broad temperature range. You can be assured that in using these synthetic fluids your vehicle will perform better, even in extreme temperature conditions.
What kind of fluid is in Chevron ATF MD3?
CHEVRON ATF MD3 is a passenger car and light truck automatic transmission fluid for most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes requiring a high-performance, multi-purpose, power transmission fluid. Chevron Automatic Transmission Fluid MD-3 delivers value through:
What kind of transmission fluid does Chevron use?
Chevron Automatic Transmission Fluid MD-3 isdesigned for use in most pre-2006 automatic transmissions built by General Motors, Ford MotorCompany and other makes requiring a high performance, multi-purpose, power transmission fluid.It is recommended for applications that call for the former DEXRON-III H, MERCON, and Allison C-4 fluids.
Which is Havoline automatic transmission fluid do you use?
Havoline Automatic Transmission Fluid MD-3 is formulated for applications that call for the former DEXRON-III H, MERCON, and Allison C-4 fluids. Good stuff… Dexron III equal.
When to use Dexron-III H and Mercon?
Formulated for applications that call for the former DEXRON®-III H, MERCON®, and Allison C-4 fluids. against the formation of lacquers, sludge, or other harmful deposits.
CHEVRON ATF MD3 is a passenger car and light truck automatic transmission fluid for most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes requiring a high-performance, multi-purpose, power transmission fluid. Chevron Automatic Transmission Fluid MD-3 delivers value through: •
Chevron Automatic Transmission Fluid MD-3 isdesigned for use in most pre-2006 automatic transmissions built by General Motors, Ford MotorCompany and other makes requiring a high performance, multi-purpose, power transmission fluid.It is recommended for applications that call for the former DEXRON-III H, MERCON, and Allison C-4 fluids.
What is the product number of Havoline automatic transmission fluid?
SDS : 8654 Safety Data Sheet SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Havoline Automatic Transmission Fluid MD-3 Product Use: Automotive ATF (Automatic Transmission Fluid) Product Number(s): 221854, 223082
What kind of media is used in automatic transmission fluid ( SDS )?
Revision Number: 15 Revision Date: May 07, 2019 3of 8Havoline Automatic Transmission Fluid MD-3 SDS : 8654 EXTINGUISHING MEDIA:Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames. Unusual Fire Hazards:Leaks/ruptures in high pressure system using materials of this type can create a fire hazard