What is the minimum height and maximum height of the raised floor system?
The raised-floor height should be between 155 mm (6 in.) and 750 mm (30 in.). For processors with multiple channels, a minimum raised-floor height of 305 mm (12 in.) is recommended.
Why is bathroom floor raised?
Beneath the tile is a layer of thinset mortar, and beneath that is a concrete backer-board which is either 1/4″ or 1/2″ thick. All of these layers sit on top of the original subfloor, which makes the bathroom floor higher than the rest of the house, unfortunately.
Why do data centers have raised floors?
In data centers, raised floors are also used as a way of distributing cold air. By using a raised floor, facilities not only reduce the amount of air needed to cool equipment, they also require less energy and improve temperature distribution across all of the cabinets.
What do you do if your tile is higher than hardwood?
The answer to height differences is to use a floor transition strip that ramps up or down from tile flooring to wood flooring. Transition strips, typically made of wood or lightweight aluminum, can easily be cut to length with a regular miter saw or hacksaw.
What is a raised floor in data center?
A raised floor is a data center construction model in which a slightly higher floor is constructed above the building’s original concrete slab floor, leaving the open space created between the two for wiring or cooling infrastructure.
What is the standard floor load?
U.S. building codes specify a uniform live load of 40 pounds per square foot (psf) for most residential floor designs. This load is intended to account for the large number of loads that can occur in a residence.
How tall should a raised floor be in a data center?
Raised height guidelines for other data center raised floor: 1 450-600 mm, IBM 2 Minimum 450 mm, according to SUN600 as the “ideal” value 3 300 to 600 mm, BS EN 12825 4 Minimum 300mm, TIA mm 569
How tall does a raised floor system need to be?
The raised floor is constructed of 600x600mm anti-static floor tiles to the information room with a height of at least 300mm. When used as an exhaust space, refer to VDI 2054 for the “floor room air conditioning system” standard for floor height.
How tall should the ceiling be in a data center?
Assessing appropriate ceiling height in the data center can be tricky. It depends on, obviously, how much space you have to work with and factors such as your fire suppression system and cabling. Expert Robert Macfarlane offers some advice. The short answer: at least 12 feet . . . but 14 feet is even better.
How tall are the posts on a raised floor?
The height of the posts is dictated by the volume of cables and other services to be stored beneath the raised floor; the typical height is somewhere between 24 inches (610 mm) and 48 inches (1219 mm).