How do I reset my sprinkler timer?
How to Reset a Sprinkler System
- Turn the control dial to the “off” position.
- Press the “next” button to access the clear-memory feature.
- Press and hold the “off” button until the display stops blinking.
- Turn the control dial to the “run” position.
- Press and hold down the “minus” arrow and “prog” buttons simultaneously.
How much does it cost to replace a sprinkler timer?
Replacing a sprinkler system timer will cost $40 to $450, plus labor. Your pro may only need to reprogram or rewire this component instead of replacing it, at an average rate of $50 to $100 per hour. Putting in new wiring for the sprinkler system ranges from $0.50 to $1.50 per foot, in addition to labor charges.
How do you test a hunter XC sprinkler system?
To initiate the test program:
- Press and hold the PRG button. The station number will be flashing.
- Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes.
- After a 2 second pause, the test program will begin.
How do you manually turn on a Hunter sprinkler valve?
One way is to simply turn the solenoid (the black cylinder with 2 wires) counter-clockwise a 1/4 to 1/2 turn. To shut off the valve, twist the solenoid clockwise until it is snug on the valve. The other way is to use the bleed screw the same way, loosen the screw enough to release air (1/4 to 1/2 turn).
How long should I water my lawn?
It is ideal to water lawns about one inch of water per week. To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water.
What do you call a hunter irrigation controller?
Controllers. Irrigation controllers are sometimes called irrigation timers. Hunter’s lineup offers an array of user-friendly features and smart controller water-saving options built to fit any landscape irrigation system.
What is the successor to the Hunter XC?
The XC was Hunter’s entry-level residential controller that was sunset in 2010. The XC was replaced by the X-Core, which was developed as a more efficient and versatile solution for the same applications. The X-Core is recommended as the replacement for current XC owners.
How long does a Hunter X-Core irrigation system last?
Offering 3 flexible irrigation programs with 4 start times each and run times up to 4 hours, the X-Core is the perfect solution for residential and light commercial applications. Install a Hunter Solar Sync sensor to maximize water savings and automatically regulate irrigation run times according to on-site weather conditions.
What does automatic short circuit protection do on Hunter sprinkler system?
Automatic short circuit protection is a feature found in all Hunter AC powered controllers. This feature automatically detects electrical faults, which are typically caused by wiring issues. Only affected stations are skipped, allowing all other stations to water normally as programmed.