How much oil does a cb360 take?
Honda CB360
| Manufacturer | Honda |
|---|---|
| Seat height | 810 mm (32 in) |
| Weight | 357 lb (162 kg) (dry) 392.4 lb (178.0 kg) (wet) |
| Fuel capacity | 2.9 US gal (11 l; 2.4 imp gal) |
| Oil capacity | 0.7 US gal (2.6 l; 0.58 imp gal) |
What kind of oil does a Honda CB350 use?
We’ve also had success running diesel truck oil (Shell Rotella, Chevron Delo, Mobil Delvac) at 15W-40 viscosity. Diesel oil has the bonus of extra detergent additives as well as zinc which older engines need. Synthetic oils are are not recommended as they will cause your clutch to slip.
What kind of oil does a Honda CL360 use?
Factory spec on the fork oil is 135 – 140cc (4.6 – 4.7 ozs.) of premium quality ATF (automatic transmission fluid), however we recommend a 10W (light rider) to 15W (heavy rider) motorcycle fork oil. ATF is approximately 5W and replacing it with a heavier weight oil will stiffen up your front end.
What kind of oil should I use on my CB360 twin?
What type of fork oil and how much fork oil should I use in my CB360 / CL360 / CJ360? Factory spec on the fork oil is 135 – 140cc (4.6 – 4.7 ozs.) of premium quality ATF (automatic transmission fluid), however we recommend a 10W (light rider) to 15W (heavy rider) motorcycle fork oil.
What is the compression ratio for a CB350?
Compression ratio: 9.5:1 What engine oil should I use for my CB350 / CL350 / SL350? Recommended oil viscosity for general riding and all temperatures is: SAE 10W-40. We’ve also had success running diesel truck oil (Shell Rotella, Chevron Delo, Mobil Delvac) at 15W-40 viscosity.
Factory spec on the fork oil is 135 – 140cc (4.6 – 4.7 ozs.) of premium quality ATF (automatic transmission fluid), however we recommend a 10W (light rider) to 15W (heavy rider) motorcycle fork oil. ATF is approximately 5W and replacing it with a heavier weight oil will stiffen up your front end.
What kind of engine does a Honda CB360 have?
Honda CB360. The Honda CB360 is a twin cylinder four-stroke motorcycle produced by Honda from 1974 to 1976. It succeeded the Honda CB350 and provided an alternative to the four cylinder CB350F and CB400F. The CB360 was a new design. The 356 cc engine was tuned for broad range torque, and drove the rear wheel through a six-speed gearbox.
What type of fork oil and how much fork oil should I use in my CB360 / CL360 / CJ360? Factory spec on the fork oil is 135 – 140cc (4.6 – 4.7 ozs.) of premium quality ATF (automatic transmission fluid), however we recommend a 10W (light rider) to 15W (heavy rider) motorcycle fork oil.
We’ve also had success running diesel truck oil (Shell Rotella, Chevron Delo, Mobil Delvac) at 15W-40 viscosity. Diesel oil has the bonus of extra detergent additives as well as zinc which older engines need. Synthetic oils are are not recommended as they will cause your clutch to slip.