How do I add coolant to my Honda?
To put the coolant into your Honda, unscrew the top of the overflow reservoir, and slowly pour in the mixture until it has reached the full mark. Tightly replace the cap on the reservoir and you are all finished! Coolant should be changed every couple of years, following the recommendations of the manufacturer.
What kind of antifreeze goes in a Honda Rancher 420?
Honda 08C50-C321S02 coolant , genuine OEM Honda part, type-2 ready to use 50/50 blend, exclusive Honda formula with non-abrasive corrosion inhibitor for maximum protection, advanced type-2 “blue” formula is 100% compatible with original “green” coolant, protects from -34F freeze point to 265F(at 15 PSI), boiling point: …
What should I put in my Honda rancher coolant reservoir?
BTW, even at the price Honda anti-freeze is a lot cheaper than replacing a water pump. And something no one mentions. your are supposed to use distilled water. I’d think a little water would do fine, if you are only topping it off. The little reservoir only needs about 8 oz in it.
What kind of oil does a Honda rancher 350 take?
Fill up the engine with Honda 10W-30 motor oil through the fill opening on the left side of the engine, opposite the dipstick opening on the right. NOTE: The Honda Rancher 350 takes a little over 2 quarts of oil, so start off by pouring in just 2 quarts. Step 11.
How do you change oil on a Honda rancher?
Performing regular oil changes, along with changing the air filter on a Honda Rancher will keep your machine running great for years to come. Step 1. Run the engine for a few minutes to heat up the oil, which makes it drain out faster. Step 2. Loosen up the dipstick so that air can get into the engine, which also helps the oil drain out easier.
What kind of antifreeze do you use on a Honda Accord?
If the level is at or below the MIN line, add coolant to bring it up to the MAX line. This coolant should always be a mixture of 50% antifreeze and 50% water. Never add straight antifreeze or plain water. Always use Genuine Honda Antifreeze/Coolant.
How to add coolant to a Honda rancher 420?
Add coolant / antifreeze to a HONDA Rancher 420! – YouTube Add coolant / antifreeze to a HONDA Rancher 420! If playback doesn’t begin shortly, try restarting your device.
Can you use automotive coolant on a rancher?
Click to expand… agreed 100% dont user automotive coolant. Use what is recommended, or equivalent there of, in your owners manual, personally I use a safe for all applications anti freeze from advance as long as it is aluminum block safe I do not see how it could make a lot of difference.
If the level is at or below the MIN line, add coolant to bring it up to the MAX line. This coolant should always be a mixture of 50% antifreeze and 50% water. Never add straight antifreeze or plain water. Always use Genuine Honda Antifreeze/Coolant.
What should I use to cool my Honda rancher?
Use what is recommended, or equivalent there of, in your owners manual, personally I use a safe for all applications anti freeze from advance as long as it is aluminum block safe I do not see how it could make a lot of difference. If you go with the Honda coolant..Well you can’t go wrong there.