What does Error Code F mean on Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.
What does code F35 mean on Kenmore washer?
water level pressure sensor failure
The F35 indicates a water level pressure sensor failure. The SUD is normally displayed when there is excessive detergent suds in the tub. Make sure you are only using the recommended amount of HE detergent. Then run the washer without clothes on a drain and spin cycle.
Why does my washer say F?
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly.
Why is my Whirlpool duet washer saying F35?
If the pressostat and its connections are ok, but you still see the F35 Error code on the display, there is probably a malfunction of the control module of your device. Some of its elements might have burned out because of the voltage surges or any other reasons, and have to be replaced now.
What is the error code on my Whirlpool duet washer?
Whirlpool Duet washer error code F35 The indication of the F35 Error code on the control board of your Whirlpool washing appliance points on the issues with the water level sensor, which is responsible for sending signals to the main unit when its time to fill the water into the tank.
What does the F35 code mean on a water level switch?
There are not too many options on how to decipher the F35 code properly. In 99% of cases, it is connected with the water level pressure switch or its wiring. But sometimes the indication of this combination can be caused by a one-time malfunction of the control board, which can be reset by rebooting the appliance.