What does the SRS light mean on a Mercedes Benz?

What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.

Is there a way to reset the SRS light?

You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.

What does it mean when SRS warning light stays on?

SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system. It is very unlikely that your airbags are going to deploy randomly, but the concern is that they may not deploy…

What’s the difference between ABS and SRS codes?

An ABS code is used to check whether or not your ABS systems require repairs. On the other hand, SRS codes are used to help determine faults with your airbags. The SRS, or safety restraint system, consists of a collection of impact modules and sensors that determine when your airbag system will trigger.

What happens if your SRS and ABS lights are on?

Answer: The SRS, ABS, and TRC lights being on will not affect your car’s smog check results. The smog inspection does not test a vehicle’s SRS safety restraint system, ABS anti-lock braking system or anti-skid braking system, or TRC traction control system. A vehicle can pass the smog check with these lights on.

What can you do with an ABS / SRS scanner?

With an ABS/SRS diagnostic scanner, you will have the ability to read codes and make sure all safety measures are in place before putting yourself in harm’s way. Anti-lock brake system or ABS light may illuminate for a multitude of reasons, some may be because of a faulty ABS pump or a bad relay.

Is there a scanner that reads the SRS light?

Here is a scanner that works with Mercedes-Benz and will rear fault codes and reset the AirBag, ABS and check engine light. Our favorite scanner that for an in-depth Mercedes-Benz troubleshooting is the iCarsoft MB II. Not only does it read the SRS light (Airbag Control Unit) but also every control unit in your Mercedes-Benz.

Is the Mercedes SL Class in the shop?

Tells me car is the shop but car hasn’t returned from the shop. They called me back and offered me another car a mich later car with almost double the mileage. Contact was good.

What does the SRS light on my SL500 mean?

Your vehicle’s restraint systems control module sits atop the transmission tunnel, and wired to it are a device in each seat for tensionsing the seat belts in the event of an accident (“ETR ignition squib”). The fault code you have indicates there is a problem with the wiring or the “driver” seat tensioning device.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

How to reset SRS / airbag light on Mercedes Benz?

Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts. Look at your OBD scan tool and write down the codes it displays. 3. Check your owner’s manual for what the codes mean. 4.

Why is the SRS warning staying on on a Mercedes Benz?

Why is the SRS warning staying on? Here is a list of some of the most common problems with the SRS system on a Mercedes Benz. Seat Occupancy Senor in the passenger seat. Low voltage in the electrical system. Battery issue or charging. Seat belt latch. Damaged Wire Contacts at the doors. Defective, damaged or loose contact at the impact sensors.

How to troubleshoot Mercedes Benz air suspension problems?

Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.

Where is the SRS light on the dash?

If the red SRS lamp on the dash is accompanied by the orange airbag lamp next to the transmission shifter is lit, the fault is commonly connected to the passenger seat sensor.

Is there a way to reset the SRS lights?

This resets the SRS lights as before on ignition power, without a star reset. Just for information the China emulator box contains a programmable PIC chip that emulates exactly the signal that would be given from the MB seat pad matrix.

Where are the SRS lights on a Mercedes?

There are 3 wires to connect, colour for colour those that exist under the seat Brown, White and Red on the yellow connector. This resets the SRS lights as before on ignition power, without a star reset.

Why did my Mercedes SRS air bag go off?

Understanding that the weight may fool the occupancy sensor to thinking an adult bum is on the seat, the child seat detector overrides this and signals the Air Bag Control Module to turn off passenger side airbags. When it does this, the orange Air-Bag off transmission LED illuminates showing the system is disabled and its safe for baby to travel.

Where is the SRS fault on the Mercedes E class?

Here is a way to deal with a common SRS fault that lies within the seat pad of the Mercedes E Class (W210). (I am sure also similar for other models)

How to reset check engine light on Mercedes slk230?

I found on the wiki a method how to reset check engine light on your MErcedes SLK230, switch the key in ignition on position 2, turn steering wheel full left then full right and back to centre and warning lights will be reset. This works only after you changing the battery.

Why does my SRS light keep going on?

Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Step 1 Install a new battery; Step 2 Reset SRS/ Airbag light. Instruction on How to Reset the SRS Light on a Mercedes Benz: 1.

How to reset service light indicator Mercedes SL 500?

Within 10 seconds, turn key in steering wheel lock to position 0. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds). Release button.

How can I Reset my SRS warning light?

It will tell you where the problem is and allow you to reset it once the problem is fixed. Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.

Why does the SRS light come on on my Mercedes?

We Can Fix It! In the majority of cases when the SRS light is on on your Mercedes, the fault is associated to the passenger seat pad. In the passenger seat there is an electronic pad that sensors whether the seat is occupied and therefore switches the passenger air bag on or off.

If the red SRS lamp on the dash is accompanied by the orange airbag lamp next to the transmission shifter is lit, the fault is commonly connected to the passenger seat sensor.

How to read and reset SRS / airbag light?

Battery dying. How to read and reset SRS/ Airbag light? Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it.

Do you need to disconnect seat covers for SRS?

Air bags and Emergency Tensioning Devices (ETD) are designed to function one time only. Once these systems deploy they must NOT be reused. If you work on the SRS system, you should disconnect the battery. Do not use seat covers unless approved by Mercedes-Benz. Seat covers can restrict the proper operation of the airbags integrated into the seats.

Is the Bas / ESP light on on my W202 C230?

I have a 2000 W202 (USA MODEL) C230 Kompressor sedan with approximately 60k miles which has been exhibiting an intermittent illumination of my BAS /ESP light. Well, it WAS intermittent but now it’s illuminated all of the time.

How do you reset SRS on a Mercedes Benz?

Turning the steering wheel fully left and right doesn’t reset SRS – it re calibrates the steering angle sensor. If you disconnect the vehicle battery, you will need to do this if the ESP error light is illuminated. Start the engine and then run the steering through its full left and right range. That will extinguish the ESP light.

Can a steering angle sensor be calibrated to fail?

The steering angle sensor doesn’t usually fail, but they may need calibration. You can use a scanner such as the iCarsoft MB II to read the steering angle sensor values and correct the problem. Before you can turn off the ESP light, you first need to find the cause of the ESP light and fix the problem.

Where is the steering angle sensor on a Mercedes Benz?

Steering Angle Sensor – is right behind the steering wheel in the steering column. It’s the main purpose is to calculate the angle of the steering wheel so that the car knows if you are taking a turn or if you are going straight. The input from the steering angle sensor is used by the ESP control module.

What are the fault codes for Mercedes SRS?

Child seat:”Signal” transmission fault between front passenger seat and “Babysafe” Part E2e5 (Turn signal lamp) in module E2 (Right front headlamp unit) is defective. C1011. BAS light, play in steering column causes steering angle sensor to lose memory (?) C1401.

Why is the SRS light on my SL500 not working?

The most common fault is the SRS connections under the passenger seat, all the yellow plugs and 1 each side. often just disconnecting the plugs and spraying with a non drying switch cleaner will fix the problem, but once the lamp is on the car usually has to go onto STAR or other to turn the warning off.

Why do my Mercedes Benz ESP Lights Come On?

The BAS / ESP / ABS lights is not a problem with just Mercedes-Benz ML320 / ML430 models. It is a problem that has impacted all Mercedes-Benz models. We have included the top causes that trigger these lights to come on in the section below.

Where is the SRS light after the fuse reset?

SRS Light After Fuse Reset! Fuse Box: 1 inside the car, next to the Driver’s door. The other day i was checking my fuses to see which one went bad when i put in my radio. I removed one by one until i found the bad one. But now my SRS light came on and will not go off. I guess removing the fuse and put it back has brake the circuit with the battery.

Where is the yellow connector on a Mercedes SRS?

There is a yellow connector beneath the seat, this houses all the connections to the seat pad sensor and links its signals to the ABCM.

Where is the contact matrix on a Mercedes SRS?

Layered within the seat base skin of the passenger seat, there is a complex contact matrix (like a foil printed circuit – looks like an aerial view of a maze) that senses if the seat is occupied (a bum on it) and in most cases with post face-lift models, also auto-senses the proximity of the MB child seat.

Where is the SRS light on a Mercedes Benz?

This is located on the lower left side of the control panel on the driver’s side of the car. Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts.

Is there a SRS light on the dash?

On my W203 C class 2002 C230 Kompressor Coupe, Manual 6 speed, Audio 20 HU, CDC (added – read later, no other Audio or phone Fiber optics installed), with the basic HVAC control head. And a SRS light on the dash & MFD. Short Summary: Great experience. I scanned thru my OBDII port and found all errors.

How can I tell if my Mercedes Sam is defective?

Next to confirm that the SAM unit is defective you should read the fault codes. For this you will need to see a mechanic that has Mercedes Star Diagnostic or use a scanner such as iCarsoft MB II. The fault codes will have enough information to tell you if this is a SAM module problem or not.

How to remove the SRS light from your car?

Quick Fix to remove SRS Dash light. Lightly jiggle a small flat head screwdriver into the seatbelt connectors, then spray electronic connector cleaner (radio… Quick Fix to remove SRS Dash light. Lightly jiggle a small flat head screwdriver into the seatbelt connectors, then spray electronic connector cleaner (radio… Skip navigation Sign in

Is the SRS unit on my 2005 SL500?

I too have an iCarsoft i980 and a 2005 SL500 and have addressed this same SRS malfunction notice on the instrument panel readout. I disconnected both seat (yellow housing) connectors and used a spray connector cleaner on the contacts. Once reconnected, I was able to use the i980 unit to clear the code.

Is the Mercedes-Benz slk280 has SRS fault?

Mercedes-Benz SLK280 has SRS fault SLK 280 R171 2006. Mercedes-Benz SLK280 has SRS fault SLK 280 R171 2006. I have a 01/02 mod. c class 320 auto 120k miles. BAS & ESP I have a 01/02 mod. c class 320 auto 120k miles. BAS & ESP LIGHTS COME I had bas light done new brake light switch fitted ok for a month then on … read more

Which is the best scanner to reset the SRS light?

Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.

Why is my SRS light on on my C class?

Some C-Class owners have reported the SRS warning light displays when the battery is low. Check your battery to determine if it needs a charge, or needs to be replaced. The easiest way to check your battery is using a voltmeter.

Where is the reset SRS light on a Mercedes Benz?

Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car.

Why does my Mercedes car flash service lights?

Your Mercedes vehicle will flash a host of service lights to inform you when something might be damaged inside the car. If the air conditioner unit is not running normally or is only blowing out warm air, it may be a temporary fault.

Is it safe to drive with SRS light on?

While you can certainly drive while your SRS light is on, it isn’t safe. You should get your vehicle to a service center as soon as possible so that a technician can inspect your SRS computer.

Why does the SRS light come on while driving?

But if it stays on while you drive, or comes on while you’re driving, it indicates a problem with your airbags or some other part of the SRS. Let’s take a brief look at how your airbag system works, reasons the SRS light can come on, and why it’s OK to drive with the light on, but only if you get it fixed quickly.

What kind of car is the Chrysler 300C?

Take our quiz & meet the car you’ll love. The Chrysler 300C is a sedan. It gets EPA-estimated undefined MPG combined. Small Family vehicles include mid-size and larger sedans, hatchbacks, wagons, SUVs and minivans with four doors and five seats. NEW Take our quiz & meet the car you’ll love. What Are the Best New-Car Deals for February?

Why is my SRS light on in my Mercedes C class?

A malfunctioning seat belt could cause the SRS light in your Mercedes-Benz C-Class to display on the dashboard. The same is true even if the air bags in your vehicle are safe to deploy in a crash. If your C-Class is under warranty, the dealer will replace the malfunctioning seat belt (s) at no cost to you.

What do the lights on the Mercedes dashboard mean?

Modern Mercedes-Benz cars are filled with lots of sensors that monitor how each system in the car is behaving. The lights on the dashboard display what systems are in use and they also highlight when one of those systems is not working as it should. But what do all those different symbols mean?

What causes the SRS warning light on the dashboard?

WHAT IS CAUSING THE SRS WARNING LIGHT? When the SRS warning light illuminates, there can be a number of possible causes. Some of them might be easy to spot, like a coin lodged in the latch of your seatbelt, while others may be harder find.

Is there a way to read the SRS light?

Not only does it read the SRS light (Airbag Control Unit) but also every control unit in your Mercedes-Benz. Note that this does not work with Mercedes-Benz, pre-2000 that require 38-pin connection. For those models you should consider the Carsoft Multiplexer 7.4 which requires a laptop. Unless you are not concerned about the cost.

Are there any problems with my Mercedes car?

Some Mercedes cars show a runnability issue, especially the ones with the V12 engine. Symptoms of this problem include a check engine light, cylinder misfires, and failure of O2 sensors.

Why does my Mercedes engine refuse to start?

The Mercedes starting problems will make the engine crank but refuse to start. The crankshaft position sensor is the culprit here that does not send the TDC (Top Dead Center for the piston in the number one cylinder) signal to the engine. As a result, the engine does not fire despite cranking.

What causes a Mercedes Benz SL500 to stall?

Tap the to learn more about the most common Mercedes-Benz SL500 problems. The engine may stall when the engine is warmed up. The AC compressor may seize resulting in loss of cold air from the AC vents. There have been some issues reported with the electric sliding doors. Ignition switch failure may cause the car to stall or fail to start.

How much does it cost to fix a 2003 Mercedes SL500?

1 Active Body Control System Failure 2003 SL500 Average Cost to Fix: $6,000 Average Mileage: 80,000 mi 2 Check Engine Light On, Running Poor, No Power 2003 SL500 Average Cost to Fix: N/A Average Mileage: 18,000 mi 3 ABS Failure 2003 SL500

How to bypass seat occupancy recognition sensor SRS emulator?

If you do a quick search on Amazon, for example, you find several listings for Seat Occupancy Occupation Sensor SRS Emulator. Owners may install an emulator which will bypass the child seat recognition feature and just erase the fault code via the OBD-II port under the dashboard.

How does the SRS warning system work in a car?

SRS Warning System. The SRS system checks the operation of several components in your car such as: Airbags. Airbag control unit. Crash sensors. Emergency Tensioning Devices. Belt force limiters. Child occupancy sensor in front passenger seat.

What does SRS stand for in Mercedes Benz?

In this video, we will show you how to use the iCarsoft i980 to reset the SRS on Mercedes-Benz cars manufactured after 1996. What does SRS light mean? SRS stands for Supplemental Restraint System.

Is the Red SRS light still on the dash?

Last week I purchased a used SRS module on the internet. The seller listed the vehicles vin number, and it looked to be close in production to my vin. After installing the used SRS module I still have the red SRS light on the dash. Tried turning the steering wheel left to lock and right to lock 5 times, SRS will not turn off.

What does SRS stand for in airbag warning light?

SRS stands for Supplemental Restraint System, any it is refered as the SRS or Airbag Warning Light. This could be because the AirBag Control Unit is not programmed correctly. SRS Control Unit is not parameterized or as some may refer taught-in.

Where is the SRS scanner on a Mercedes Benz?

Plug in this scanner on the OBD II port found under the dashboard on the driver side. Hit Read on the scanner. Once the codes display on the LCD screen, hit erase. It’s that easy. Note that if the problem that caused the AirBag / SRS light to come on in the first place is not resolved, the Airbag / SRS light will come back on.

Why does the SRS / airbag light stay on?

What should I do if my SRS warning light stays on?

If you are that lucky, you should consider getting the Autel DS708 which covers more vehicles, not just Mercedes-Benz. It allows you to read and diagnose control systems in most cars. You can perform programming and stream sensor data live.

When does the air bag indicator light go off?

The indicator light which shows that the passenger air bag is off is displayed when the seat is unoccupied. The light goes off when the seat is occupied by a passenger or item of sufficient weight to have the supplemental restraint system function to its full potential.

How old is the instrument cluster on a Mercedes’s class?

There was a Recall Campaign Bulletin issues by Mercedes-Benz that covered any S-Class with instrument cluster problems up to 10 years old and unlimited miles which now has expired since the W220 are over 10 years old. This article will list the most common problems with this cluster and solutions. You can try these repairs yourself.

How to remove a cluster from a Mercedes Benz S430?

To repair this cluster you first need to remove it. Removing the cluster from a Mercedes-Benz S430/S500/CL500 is very easy. To remove the cluster you will need the following tools: Watch the video on how to remove the cluster. This opens in a new window. Remove Cluster W220 S-Class from DIYCarCenter.com on Vimeo.

Why is the SRS light flashing on my Mercedes Benz?

Where are the fuses located on an e320?

You can also see a list of all the fuses, their designation and layout. The fuse boxes shown below are apply to 1996 1997 1998 1999 2000 2001 2002, models E320 E420 E430 E55 AMG. The main fuse box is located on the left side in the engine compartment near the windshield. Here is a layout of the fuses in the main fuse box.

What causes the ABS light to come on?

There are many things that can cause your anti-lock brake (ABS) light to come on. Some of those things are serious, but oftentimes it just means you need to clean the sensors. One or more dirty wheel sensors (all cars with anti-lock brakes have at least one) can cause the system to trigger the ABS light during the computer’s self-evaluation cycle.

What is the SRS code for the airbag squib?

The SRS code (“9243 – the resistance value in the ignition circuit containing component R12/10 (Front passenger side airbag ignition squib) is too high”). The SRS code would not clear after that.

How long does the SRS warning light stay on?

While your car will run with this light on, it is important that you diagnose this problem as soon as possible. Under normal operations, when you first turn the ignition and start the car the light stays on for about 5 seconds and then turns off.

What to do if Mercedes SRS wont start?

Call 01406 422457 or fill in our form for an appointment now. Usually carried out while you wait. Independent Specialists | Every Car Catered For. My Nissan Terrano wouldn’t start on occasions and have taken it into lots of garages over the years but to no avail.

How do you remove the SRS dash light?

Quick Fix to remove SRS Dash light. Lightly jiggle a small flat head screwdriver into the seatbelt connectors, then spray electronic connector cleaner (radio shack) inside and let it dry for 20 minutes. Hope it works for you.

Why is my Mercedes C230 sport 4dr bad?

Engine intake breaks due to cheap plastic rods. Valve body in transmission is a problem and gets stuck in gear a $2,400 dealer only repair. Electrical failures. Do not purchase this car !!! I have owned this car for 7 months now. To sum my experience up: I like it. Love the look (mine is black).

How do you reset the SRS light on a Silverado?

How to Reset the SRS Light on a Silverado. Turn the ignition off. Open the hood. Lift up on the tab on the side of the fuse cover to remove it. The fuse block is on the driver’s side of the engine compartment. Pull out the SRS fuse.

Where can I get a SRS code for my car?

These codes can be read and cleared using an OBD scan tool that you can purchase from your local auto parts retailer. Many auto parts stores will even let you use their OBD scan tool Vehicles free so that you will know what the problem is and possibly purchase parts from their store to fix the problem.

Is the Mercedes W211 SRS restraint system defective?

Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later. Hidden Functions Mercedes.

How to remove the restraint cover on a Mercedes?

To remove the cover on the side of the driver’s seat there is a tricky clip at the rear of the squab.Do not try to disconnect it until everything else is disconnected -two small screws at the front ,two push/pull clips. The rear clip is NOT push/pull !! To disconnect it, slide the entire cover to the rear of the seat.

What does SRS warning light on Mercedes W204 mean?

Here’s what a solid SRS warning light could mean for your vehicle. This article applies to the Mercedes-Benz w204 (2007-2014). The supplemental restraint system (SRS) light in your vehicle will illuminate whenever there is a problem with your air bags or seat belt fasteners.

How do I Turn Off the ESP light on my Mercedes?

ESP light stay on constantly if the “ESP Off” button was pressed. To turn it off: Press the ESP button on the dash of your Mercedes-Benz and hold it for 5 seconds. This will reset the light.

What does it mean when ESP light in Dash comes on?

ESP light stays on all the time. If the light is always on, the ESP is either off or has detected a problem. ESP light stay on constantly if the “ESP Off” button was pressed. To turn it off: Press the ESP button on the dash of your Mercedes-Benz and hold it for 5 seconds.

What happens if the ESP light is on on a Mercedes Benz?

If you lost traction while going around a curve, there would be no ESP to help you out. The only thing that may limit you driving your Mercedes-Benz if the ESP light is on could be if the car goes into limp mode. This can happen depending on what is causing ESP problem.

Why does my Bas light come on in my Mercedes Benz?

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times. Turn off the engine. Restart. Brake Light Switch may cause BAS / ESP / ABS light to come on. It is the most common problem with Mercedes-Benz cars.

What should I do if my SRS light comes on?

If you need a scanner that will also troubleshoot Transmission, ESP, ABS and any other control unit on your Mercedes-Benz, check out the iCarsoft MB II, a powerful diagnostic scanner for Mercedes-Benz cars. Want to know why the SRS light came on?

Can a failed ABS sensor trigger the Bas light?

If you have an ABS sensor that has failed, it will also trigger the ABS, ESP, BAS light. Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled.

Can a faulty ABS sensor cause the ESP system to be disabled?

Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled. A faulty ABS sensor could cause other issues as well such as Check Engine Light, car not moving when in Drive, speedometer not working.

If you have an ABS sensor that has failed, it will also trigger the ABS, ESP, BAS light. Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled.

How much does it cost to repair a SRS light?

He said it was just the wiring harness that attaches to the sensor that costs about $20 to repair. But with labor, parts and reset it costed me almost $200. With Transmission flush (almost $500), free car wash, and SRS job, with a 15% off coupon, I paid about $670. Not bad.

Why does the SRS light keep coming on?

Related SRS Airbag problems. Check the belt buckle. The red buckle release on the driver and passenger seat. Loose contact may trigger the airbag light. If the light is triggered it will stay ON and needs to be reset using one of the scanners below. Steering Wheel Clockspring Ring. Can cause the AirBag / SRS light to stay on.

What are the different types of Mercedes Benz warning lights?

Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient! Models examined include AMG, B, C, CLA, CLS, E, G, GL, GLA, GLC, GLE, GLK, GLS, GT, M, S, SL, SLC and SLS Class and Series vehicles.

When did the Mercedes SL Class SL 500 come out?

No accident or damage reported to CARFAX… 1st owner purchased on 02/05/03 and owne… Last serviced at 77,970 miles in Hackett… 1st owner drove an estimated 0 miles/yea… No accident or damage reported to CARFAX…

What kind of engine does the Mercedes SL 350 have?

An improved 5.5-litre V8 was introduced in 2007 with 382 hp. V12 engines were available in the SL 600 and the limited-production SL 65 AMG. The SL 350 3.7-litre (3724 cc) 18-valve V6 245 hp was only available in some markets.

Why is the ESP light flashing on my Mercedes?

If pressing the ESP switch does not turn off the light, or if the ESP light is flashing, it means there is a problem with the ESP system on your Mercedes-Benz. This article will help you diagnose ESP problems on your Mercedes-Benz. Toggle ESP light on / off by pressing ESP button. Shown on SLK/Crossfire.

What does Bas ESP ABS mean on a Mercedes Benz?

What does BAS ESP ABS light mean on a Mercedes-Benz? Let’s first take a look at what each of these acronyms means. BAS stands for Brake Assist System. It provides additional braking power in case of emergency situations.

When does the Mercedes Benz SOS malfunction warning come on?

If you don’t have access to the Star Diagnostic Tool you can have your Mercedes Benz dealer perform DTB P-B-82.95/636a, 03/24/2009 Supersedes: P-B-82.95/636 dated Oct. 29, 2008 “Instrument Cluster Message – “SOS TeleAid not Activated”” SRS Airbag Defective Warning could be triggered when the TELE AID malfunction is displayed.

So is it safe to drive with an SRS light on? The answer would be no, Even though there’s a possibility that the airbags could still deploy with the light on it is a huge risk if one were ever involved in an accident. We recommend having a professional look at it and diagnose the issue to have fixed immediately.

What causes a Mercedes Benz ABS warning light?

Common problems that trigger Mercedes-Benz ABS light are brake light switch, ABS wheel speed sensor, and defective clock spring. Use a multi-system OBD-II scanner to read fault codes from the ABS module.

Do you need to replace the Mercedes belt tensioner?

In this guide, you will find step-by-step instructions on how to replace the Mercedes-Benz belt tensioner. While it is not required to replace the drive belt, it makes sense to replace it simultaneously as the tensioner. It is ok to reuse the old belt if it does not show wear, cracking, degradation, or drying.

What does the SRS light on a car mean?

When you see the Supplemental Restraint Systems (SRS) light illuminated on the control panel of your Vehicles it means there is a problem with the airbags or the seatbelt tensioners. When there is a malfunction in the Vehicles codes are stored in the On-Board Diagnostics (OBD) computer.

Where is the fuse for the SRS light?

In most models, this is fuse #40, located in the lower right corner of the fuse block. Turn the ignition switch to “ON” without starting the engine. Leave the ignition on for about one minute to allow the system a chance to reset. Turn the ignition off.

What do you need to know about SRS system?

Airbags contain perchlorate material which required special handling. Air bags and Emergency Tensioning Devices (ETD) are designed to function one time only. Once these systems deploy they must NOT be reused. If you work on the SRS system, you should disconnect the battery. Do not use seat covers unless approved by Mercedes-Benz.

What was the year of the Mercedes SL500?

216 with everything. 2002 SL500 with everything. 2009 SL500 with everything. Apparently the connections carry so little current that it dosnt take much to loose the current through the connection.

What does the ABS warning light on a Mercedes mean?

If the ABS warning light is also illuminated this signals that the braking system has malfunctioned and your brakes may not work properly. In this case the Electronic Brake Force Distribution (EBD) warning light may also be illuminated. Can I still drive with my parking brake and brake fluid light on?

Why are Mercedes parking lights only on one side?

Here’s an incredibly small piece of automotive minutiae you may not have known about: Many Mercedes-Benz models have parking lights that only light up on one side of the car. You’re probably thinking this is because something is broken in these cars, but you’re wrong. It’s intentional. Allow me to explain. First, an overview of how they work.

Do you need brake light switch for Mercedes?

Very familiar with models such as E 320, C 240, SLK, CLK and several other Mercedes-Benz chassis. Luckily for you this is a very easy repair that you can also perform yourself. All you need is a Brake Light Switch for your Mercedes-Benz model.

Where are the Bas lights on a Mercedes Benz?

If your battery died or you recently replaced the battery, there is a good chance the ABS/ ESP / BAS lights are illuminating on your instrument cluster. To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left.

Is the SRS side air bag off light on?

My SRS light has been on for well over a year and now my ‘Side Airbag Off’ light is flashing on my instrument panel. Most times when I google for an answer, I get results for the ‘passenger airbag off’ light, not what I needed. PS: Post back with any fix.

What does the SRS light on your airbag mean?

What does the SRS light mean? SRS stands for Supplemental Restraint System. In other words, it is a part of your Airbag system. Some manufacturers are using an airbag light and some are using the SRS light. It is the same thing with different names.

Why is the SRS light on on my Mercedes?

While replacing the blend air motor I neglected to disconnect ml320 battery. This required removing passenger air bag. Now srs light is on. Folks have mentioned that this requires trip to dealer to reset. Does any know if they use obd2 scanner to reset or some other tool?

Why is the SRS light on my car yellow?

The connectors of an airbag system are often yellow. When you are moving the seats forward and backwards the connectors will move a little bit everytime, and it may cause bad connections between the airbag control unit and the airbags/seatbelt airbag and it will cause an error code.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

What caused the SRS light to come on?

There are a few reasons why the SRS light turns on. One of the most common reasons the airbag light turns on is because there is an interference happening with the seat belt and the sensor. This causes the warning light to falsely come on. The next reason the SRS light might be on has to do with the passenger’s seat.

While you can certainly drive while your SRS light is on, it isn’t safe. You should get your vehicle to a service center as soon as possible so that a technician can inspect your SRS computer.

What does SRS mean my light is on?

The SRS light is a warning light for your supplemental restraint system (airbags). An SRS light means that there is a problem in the system. The first thing I would check is the fuse for the SRS unit. The only way to check this is with a scan tool of some sort. I used a Solus Pro.

Why is my SRS light on?

The most common causes of an SRS light is bad connections and plugs. The control units measure the airbags carefully and it does often monitoring it between 2-5 ohms. If there gets a bit of bad connection in one wiring plug, the resistance will go over 5 ohms and the SRS light will turn ON.

Are there any Mercedes Benz E320 parts available?

Among the many types of parts we offer are those for vehicles manufactured by Mercedes Benz, including E320 parts. The Mercedes-Benz E-Class offers consumers the choice of an executive size vehicle. A variety of body and engine configurations are available with this class of vehicles.

How to reset service light indicator Mercedes E320?

How do you reset service indicator light Mercedes E320. From years: 1997, 1998, 1999, 2000. Diagnostic Reset Tool Required (please refer to TOOLS page) Manual Reset. Turn key in steering lock to position 2. Within 4 seconds press 0 button twice.

How much does a 2002 Mercedes-Benz E Class E 320 cost?

Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the 2002 Mercedes-Benz E-Class E 320 Sedan 4D. View local inventory and get a quote from a dealer in your area.

What should I do if my Mercedes SRS breaks?

So the first thing to check is the connector and it wires (best to remove the seat) If the break is suspected within the depths of the seat base, then it has to be stripped to repair/replace the parts. (This is where the repeat £220 bill from the agents came from!)

Can a Mercedes SRS child seat detecting be linked out?

A later auto child seat detecting, post face lift, later E Class W210 model, cannot be ‘linked out’ in any way sorry!

Can a Mercedes Benz run without AdBlue fluid?

Your Mercedes-Benz will run fine, but it will pollute more since there will be no AdBlue fluid injected into the exhaust gasses to reduce the harmful No x gasses. These modules bypass the AdBlue system and don’t use any AdBlue fluid. The module is installed in the trunk and requires that you make connections to existing wire harness.

Is there a bypass module for Mercedes AdBlue?

You may have heard about Adblue bypass module. Installing AdBlue bypass module may be in violation of laws in your Country or State. It is important to understand the legal requirements and the impact that you will have in the environment. AdBlue bypass module will emulate a full AdBlue tank.

Where was the Mercedes-Benz ML 350 last serviced?

No accident or damage reported to CARFAX… 1st owner purchased on 11/24/14 and owne… Last serviced at 84,569 miles in Spokane… 1st owner drove an estimated 12,211 mile… No accident or damage reported to CARFAX…

Can You disable TeleAid warning on Mercedes Benz?

Mercedes Benz no long provides TeleAid service, they have now switched to Mercedes-Benz mbrace. You have two options to disable this warning message from displaying on your Instrument Cluster.

How to check Mercedes Benz SLK 230 reading fault codes?

Before plugging the scan tool into the car’s diagnostic port, make sure that the car’s battery has at least 11.4 volts with the key off and that the battery cables are clean and secured to the terminals. Plug the scan tool into the data port and turn the ignition on. For other details, refer to the scan tool’s owner’s manual.

When does the service light come on on a Mercedes?

Mercedes-Benz cars have a service indicator light that will come on to tell you when it’s time for an oil change.

Where are the fuses in the SL R230?

SL R230 Fuse Box Locations in the engine bay on driver’s side in the engine bay on passenger’s side in the passenger compartment fuses box in the rear trunk

How much does a 2003 S Class’s 430 cost?

Year2006200520042003200220012000Year See Trade-in Value Used 2003 Mercedes-Benz S-Class S 430 Sedan 4D Edit OptionsMileage: 141,261 4.5 Consumer

What kind of engine does the Mercedes S430 have?

Overview Overview Most Popular S430 4dr Sedan 4.3L 8cyl 5A Engine Type Gas Transmission 5-speed shiftable automatic Drive Type Rear wheel drive Cylinders V8

Why does my Mercedes ASR light keep coming on?

Step 1: Ensure that the main battery on your Mercedes-Benz is holding a proper charge. Mercedes-Benz cars are very sensitive to low voltage. An old battery can be the primary cause of BAS/ASR lights staying on. It is common for BAS / ASR lights to come on with a dead battery. It takes a while for a discharged battery to charge fully.

Where is the SRS warning light on the dash?

1. SRS warning light on dash coming on intermittently or permanently 2. SRS warning light on console, between front seats, illuminated intermittently or permanently. As mentioned elsewhere in this Forum the light can illuminate when the SRS seat pad sensor connector under the passenger seat is suspect.

How to resolve SRS warning light fault ( W208 )?

Release the seat covering from around the frame (front and sides only – no need to remove completely) at the base of the seat. Once the cover has been released turn the seat onto it’s back. Lift up the seat cover (front) and expose the seat pad sensor pocket.

Why is the brake light off on my 1999 ML320?

68 people found this helpful. Our 1999 ML320 had a seriously defective brake light switch. I replaced it and the light is off. The old switch not only had a stuck plunger but it was damaged as if it had been hit with a hammer. There was one electrical contact exposed and it might have heated and melted the case. 5 people found this helpful.

What do the warning lights on a Mercedes M class mean?

Generally, this could be illuminated because of a fault sensor such as camshaft, crankshaft, Mass airflow meter or ignition coil. Mercedes M Class W163 SRS airbag warning light – this is the SRS airbag lamp symbol on the Mercedes M class and indicates that the airbag system has a fault.

Where is the ESP warning light on a Mercedes?

The ESP warning lamp, located in the speedometer dial, starts to flash when ESP is in operation. You can diagnose this system by using the iCarsoft MB V1.0 Mercedes OBD Code Reader. Mercedes M Class W163 passenger airbag off warning light – this symbol lamp will illuminate when the front passenger airbag has been de-activated.

What do the warning lights on my Mercedes mean?

Or, if you have RAC Breakdown Cover, call for recovery. This warning light indicates that there’s a problem with the power steering. For electric powered systems, this problem could be as simple to fix as rebooting a computer. Find a safe place to stop and try turning the car off and back on again after 30 seconds.

How to reset the lights on a Mercedes Benz?

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times.

Why does my Mercedes Benz ABS light keep coming on?

If any of these lights turns on and stay ON once you start to drive the car it means there is a problem with one of the following systems or related sensors. Step 1: Ensure that the main battery on your Mercedes-Benz is holding a proper charge. Mercedes-Benz cars are very sensitive to low voltage.

What does ABS Bas ASR light on Mercedes mean?

What do ABS BAS ASR lights mean? If any of these lights turns on and stay ON once you start to drive the car it means there is a problem with one of the following systems or related sensors. Step 1: Ensure that the main battery on your Mercedes-Benz is holding a proper charge. Mercedes-Benz cars are very sensitive to low voltage.

What does the SRS light on airbags mean?

What do you need to know about Mercedes star diagnostic scanner?

All MB SD control units are accessible, like engine ECU, ABS, Airbags, SRS, Aircon, Immobilizer, Keyless Entry and the rest of 40+ control units used in MB cars. You can Read / Delete Faults, Live Data, perform sensor actuation, read current configuration, initialaztion and a lot more. Things to consider before you buy one!

Navigation