How do you find the Fi code on a Honda Goldwing?
If the switch is still there, you have to wait until the FI light is on, stop and put it in neutral, then move the switch clockwise until the “S” on the dash lights and the FI light should start blinking the code in long and short blinks. Long blink =10, short blink = 1.
Are there any aftermarket lights for Honda GL1800?
No matter what kind of aftermarket Honda GL1800 lights or lighting accessories you want to add, the product descriptions will tell you if it’ll fit YOUR bike. All the details on Goldwing 1800 lightsare there for your convenience.
What does the Mil mean on a Honda Goldwing?
Also known as Malfunction Indicator Light (MIL) If you shut the bike off the error code is lost – sort of. It will be retained in the ECM but it is harder to get out. If the bike stops and the will not restart you can get the FI light to flash the error code by cranking the engine for 10 seconds.
What do I need to Mount Goldwing 1800 lights?
All the details on Goldwing 1800 lightsare there for your convenience. And keep in mind that all mounting hardware and instructions are included. Many lighting accessories attach with double sided tape, which is also provided.
If the switch is still there, you have to wait until the FI light is on, stop and put it in neutral, then move the switch clockwise until the “S” on the dash lights and the FI light should start blinking the code in long and short blinks. Long blink =10, short blink = 1.
Is the Honda GL1800 Gold Wing ex demo?
There are a few pre-registered or ex-demo 2017 models out there, so you can save £6,000 if you aren’t fussed about owning the new generation of Gold Wing.
Is there a 2002 Honda Goldwing 1800 for sale?
2002 Honda Gold Wing 1800, TONS OF CHROME ADDONS MIRROR MOUNTED WIND DEFLECTORS PASSENGER ARMRESTS LUGGAGE RACK AFTERMARKET SIDESTAND PHONE CRADL… Very cleean Garage kept low miles about 42, 000 miles. In excellent condition…. 2002 Honda Goldwing 1800, TITANIUM METALLIC. SUPER CLEAN!! LOCAL TRADE IN….
Also known as Malfunction Indicator Light (MIL) If you shut the bike off the error code is lost – sort of. It will be retained in the ECM but it is harder to get out. If the bike stops and the will not restart you can get the FI light to flash the error code by cranking the engine for 10 seconds.
What kind of cable do I need for Honda Goldwing?
You would need to get Honda’s version of ‘Digital Technician’ and the correct cable to hook the diagnostic port of the Wing to the computer. You would need to get Honda’s version of ‘Digital Technician’ and the correct cable to hook the diagnostic port of the Wing to the computer. Click to expand…
Where is the port on a Honda Goldwing?
The port is orange and is usually in a boot at the rear of the relay bank under the seat. The port is orange and is usually in a boot at the rear of the relay bank under the seat. Click to expand… Thanks a lot. How would one read the codes if they are on a trike?
Why does my GL1800 reverse light stop working?
The linkage to the starter motor maybe out of adjustment. The switch push for reverse and the light will come on the dash. That switch can cause problems. The whole switch assembly has to be change/not cheap. Try some WD-40 and work the switch back in forth.
What causes Honda GL1800 Goldwing reverse start motor to stop working?
Go to Goldwing Goldwing there are good help manuals for all goldwing. To check reverse start motor and leakage require a lot of space. You can’t post conmments that contain an email address. 2005 Honda GL 1800 Gold Wing transmission noise what will cause a gl1800 Goldwing sound like it’s trying to jump out of 5th gear?
What to do if your Honda speedometer won’t work?
Read on to learn how to fix your Honda’s failing speedometer and odometer. This article applies to the Honda Civic (1992-2002) and Accord (1992-2002).
What is the GL1800 Fi fault indicator code?
GL1800 FI “Fault Indicator” Dashboard Codes If FI (Fault Indicator) light comes on pull over but DO NOT shut bike off. Put in neutral and put side stand down, RPM’s below 1500. This signals the ECM to send the error code to the FI light. Count the number of long and short flashes. This will give you the error code.
How do you find the error code on a Honda Goldwing?
Put in neutral and put side stand down, RPM’s below 1500. This signals the ECM to send the error code to the FI light. Count the number of long and short flashes. This will give you the error code. Also known as Malfunction Indicator Light (MIL) If you shut the bike off the error code is lost – sort of.
When does the fi light come on on a Honda Goldwing?
FI light appeared about 150 miles into a 250 mile ride in heavy rain. I notice that OD light comes on when I’m in neutral and the motor is running, too. Click to expand… Find the wires where the side stand switch is or used to be.
GL1800 FI “Fault Indicator” Dashboard Codes If FI (Fault Indicator) light comes on pull over but DO NOT shut bike off. Put in neutral and put side stand down, RPM’s below 1500. This signals the ECM to send the error code to the FI light. Count the number of long and short flashes. This will give you the error code.
How do you get the error code on a Goldwing?
Put in neutral and put side stand down, RPM’s below 1500. This signals the ECM to send the error code to the FI light. Count the number of long and short flashes. This will give you the error code. If you shut the bike off the error code is lost – sort of. It will be retained in the ECM but it is harder to get out.
Put in neutral and put side stand down, RPM’s below 1500. This signals the ECM to send the error code to the FI light. Count the number of long and short flashes. This will give you the error code. If you shut the bike off the error code is lost – sort of. It will be retained in the ECM but it is harder to get out.