How do you remove a Kohler shower handle?
Firmly grasp the handle. Turn the bonnet counterclockwise and remove the handle and bonnet from the valve stem. Using a Phillips screwdriver, unthread the two screws and remove the handle sleeve, shroud, and faceplate. If applicable, use a flat-blade screwdriver to remove the pin from the adaptor.
How do you remove a shower faucet stem?
Here’s a quick how-to:
- Pry away the index cap at the front of the handle to access the handle screw. Remove the screw and pull.
- Use pliers or a deep-socket wrench to gently turn the stem counterclockwise.
- Wrap Teflon tape around the base of your stem and screw it into place.
- Replace the handle hardware.
How do you remove an old shower faucet?
Insert a Phillips screwdriver into the screw inside the faucet handle. Hold the handle securely with one hand, and rotate the screw counterclockwise to remove the screw and loosen the handle. Pull the handle off of the faucet mount. Remove the other faucet handles in the same fashion.
How do you remove a Kohler shower valve?
Remove the dial on the end of the faucet and then unscrew the Kohler shower valve collar. Once the valve collar screws are out of the faucet, you can slide the entire shower valve out by simply pulling it back with your hands.
How do you repair a Kohler kitchen faucet?
Fix a leaking Kohler faucet. Fix a leaking Kohler faucet base or handle by unscrewing the handle set screw with an Allen wrench and pulling the handle off. Then remove the bonnet nut under the handle of the Kohler faucet and take the cartridge out. Replace it with a new cartridge and reassemble the faucet to finish troubleshooting.
How do you remove the shower faucet handle?
Remove Faucet Handles Turn the shut-off valve on the water line for the shower and tub to turn off the water. Place the tip of a screwdriver beneath the edge of the decorative cap on a handle to pry it off. Turn screws in the center of the faucet handles counterclockwise to remove them, and pull the handles off.