What trucks can I drive with a Class B CDL?
With the correct endorsements, a Class B CDL allows for the operation of vehicles including straight trucks, buses, garbage trucks, dump trucks, delivery trucks, and cement mixers. The correct endorsements with a Class B CDL can also be used to drive Class C vehicles.
How many things can you miss on CDL pre trip?
The pre-trip inspection presents 15 defects, five of which are worth 12 points and 10 of which are worth four points. The highest score possible is 100 points.
How do you pass a CDL pre-trip?
Steps in Studying for a CDL Pre-Trip Inspection
- Make sure kingpins, ball joints, and shocks look good and have lubrication.
- Check fluid levels including windshield washer fluid, coolant, and oil.
- Look at steering axle tires for uneven wear.
- Look for fluid drips or leaks in and around the engine.
What to expect at a Class B CDL inspection?
Class B CDL Pre-Trip Inspection Straight Truck. The purpose of this inspection is to make sure the vehicle is safe to operate, and to see if you have the knowledge and skills to inspect your vehicle. You may have to walk around the vehicle and point to or touch each item and explain to the examiner what you are checking and why.
What do you need to know about NY CDL skills test?
Vehicle Pre-Trip Checklist Inspection – New York CDL Skills Tests: The New York vehicle inspection test (walk-around) requires the driver to point out vehicle components and explain what you are checking and why to the examiner. This includes an under the hood engine compartment inspection.
How to do a NY CDL pre trip inspection?
New York CDL Brake Check Pre-Trip Inspection Apply parking brake only and shift into a lower gear. Gently pull against the brake by releasing the clutch, and it should hold the vehicle. With the engine running, apply the foot brake and hold for five seconds. The pedal should not move (lose pressure) during those five seconds.
How to do a Class B pre trip inspection?
Class B Pre-Trip Inspection. Point to, or touch, every item that you are inspecting. Tell the tester how you know that the part you are. 1. inspecting is in good, safe working condition. Identify all defects or you may not receive credit.