Does the D16Y8 have vtec?
The Honda D16Y8 is a 1.6L 4-cylinder VTEC engine with a single overhead cam (SOHC).
What’s the firing order for Honda Civic SOHC?
The firing order is 1, 3, 4, 2. Turn the crank pulley until the cam pulley turns 90 degrees counterclockwise. The “UP” etch mark will face the front of the vehicle. Check/adjust the valves. Cylinder #4 Valve Clearance Next is #4. The “UP” etch mark will face downward. Check/adjust the valves. Cylinder #2 Valve Clearance
What should Valve clearance be on Honda Civic SOHC?
All the valves for a particular cylinder will be at rest when that cylinder is at tdc on the compression stroke. Check the valve clearance on cylinder 1 (closest to crank pulley). Use your .007 feeler gauge on the intake side and the .009 on the exhaust side. The .007 should slide in with a slight drag on the intake side.
Can you put a 007 valve in a Honda Civic?
The .007 should slide in with a slight drag on the intake side. But the .008 should not be able to fit. If it does, insert the .007, loosen the lock nut with the jam nut tool and turn the screw gently using two fingers.
How often do you change the valve lash on a Honda Civic?
According to the manual, you should adjust the valves every 12 months or 15,000 miles. You will also need to perform a valve adjustment if you loosen the head bolts for any reason (ie mini-me or headgasket change), change the cam, or disassemble the valvetrain. Feeler Gauges .007, .008, .009, .010
All the valves for a particular cylinder will be at rest when that cylinder is at tdc on the compression stroke. Check the valve clearance on cylinder 1 (closest to crank pulley). Use your .007 feeler gauge on the intake side and the .009 on the exhaust side. The .007 should slide in with a slight drag on the intake side.
The firing order is 1, 3, 4, 2. Turn the crank pulley until the cam pulley turns 90 degrees counterclockwise. The “UP” etch mark will face the front of the vehicle. Check/adjust the valves. Cylinder #4 Valve Clearance Next is #4. The “UP” etch mark will face downward. Check/adjust the valves. Cylinder #2 Valve Clearance
The .007 should slide in with a slight drag on the intake side. But the .008 should not be able to fit. If it does, insert the .007, loosen the lock nut with the jam nut tool and turn the screw gently using two fingers.
According to the manual, you should adjust the valves every 12 months or 15,000 miles. You will also need to perform a valve adjustment if you loosen the head bolts for any reason (ie mini-me or headgasket change), change the cam, or disassemble the valvetrain. Feeler Gauges .007, .008, .009, .010