How do you replace a front track bar?
Raise and support the vehicle. Remove the tires and wheels and support the axle with a jack or jack stands. Reinstall the sway bar links or install new links if supplied. Torque top and bottom to 75 ft-lbs. (See 999027 JK Quick Disconnect Links/Installation) Reinstall the front track bar once the vehicle is sitting on the ground.
How to remove front cover of window AC unit?
How To Remove Front Cover Of Window AC Unit – Preparing to clean your window AC. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How to remove a JK spring from a truck?
FRONT REMOVAL Refer to the factory service manual for lift locations. Raise and support the vehicle. Remove the tires and wheels and support the axle with a jack or jack stands. 6 Remove the track bar at the axle with a 21mm. The nut is a flag nut. (See 999208 Front Track Bar/Removal) Loosen all front control arm bolts with a 21mm.
How do you remove shocks from a JK truck?
Remove the sway bar links with an 18mm wrench and socket at the axle. If you are replacing the links, remove completely. Remove the shocks at the axle with an 18mm wrench and socket. (See 999207 Shocks/Front/Removal) FRONT REMOVAL Refer to the factory service manual for lift locations. Raise and support the vehicle.
Raise and support the vehicle. Remove the tires and wheels and support the axle with a jack or jack stands. Reinstall the sway bar links or install new links if supplied. Torque top and bottom to 75 ft-lbs. (See 999027 JK Quick Disconnect Links/Installation) Reinstall the front track bar once the vehicle is sitting on the ground.
How do you replace the parking brake on a car?
Detach the parking brake lever. Hold the shoe retaining pin from the back and remove the retainer springs. Spread the shoes apart from the top and disengage the shoes from the wheel cylinder pins. Remove both shoes and the self-adjuster as one unit. Lay the old shoes on the ground next to the new ones.
When do I need to replace my rear brake shoes?
In general, if a vehicle’s parking brake doesn’t hold or the brake pedal travels to the end of its throw the rear brake shoes need to be checked for replacement. Brake fluid leaks can also be an issue as the wheel cylinder seals can leak coating the brakes shoes with brake fluid.
What’s the best way to replace brake Springs?
Align the new brake shoes with the old set on a flat table or bench and start removing brake springs and swapping them to the new shoe set. Try not to get the linings of the new shoe set dirty as this can distort their braking ability. If dirt or grease does get on the linings try to use a small amount of brake cleaner to help remove it.
What’s the best way to replace a differential cover?
It’s best to use a plastic scraper to complete this part of the cleaning as you don’t want to scratch the cover. Once the cover has been completely clean, inspect the flat surface of the differential cover for any pits, damage or bends in the metal. You want it to be 100% flat and clean. If it’s damaged at all, replace it with a new cover.
When to replace the gasket on a rear end differential?
If the damage is significant enough inside the differential, the gears or components inside the rear end may need to be replaced. For purposes of this article, we’ll focus on the best recommended methods for removing the old differential gasket, cleaning the housing and installing a new gasket onto the differential.
Where can I find rear CV drive axle replacement?
Follow along with us on the build. Check out the related videos on both of our channels. If you haven’t already, then make sure to check out our main channel, AdrenalineJunkieProd: https://www.youtube.com/adrenalinejunkieprod We are always looking to team up and collaborate.
Can a rear gasket be replaced without taking the car apart?
In most cases, the differential can be taken apart and the gasket replaced without having to remove the rear end from the vehicle. If the damage is significant enough inside the differential, the gears or components inside the rear end may need to be replaced.