How do I reset my Cisco modem?
How to Reset your Cisco DPC3825 Modem
- Locate the Reset button the back of the modem.
- Press and hold the Reset button for 10 seconds.
- After 10 seconds, release the button. The modem should restart and the lights will flash.
- Once the modem is finished restarting and is online the settings will be back to default.
How do you reset an access point?
Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid. NOTE: Make sure to press and hold the Reset button properly. The lights on the access point should be blinking while you are holding the Reset button.
Where is Cisco router reset button?
Press the Reset button located at the back of the device with a pin for approximately 15 seconds or until the power light on the front of the device starts flashing. The Router reloads and is set to the default configuration settings.
How do I clear my cisco router settings?
Clear the configuration of your switch
- Log on to your switch, and enter the privileged EXEC mode by entering enable and then entering the enable password command.
- Enter write erase, which erases the NVRAM file system and removes all files.
- At the prompt, confirm that you want to erase all files.
How do I reset my Cisco 2901 router?
Reset Router Using Reset Button Find the Reset button on the router. Press and hold the Reset button while you power on the router. Release the Reset button after 10 seconds. Wait 5 to 10 minutes for the router to finish booting.
How do I reset my router settings?
How to Reset a Router
- Keep your router plugged in.
- Find your router’s reset button. This will be on the back or the bottom of your router.
- Use a paperclip to hold down the reset button for 30 seconds.
- Release the button.
- Wait for the router to power back on.