What does SRS stand for on a Honda Accord?
Supplemental Restraint System
The car’s onboard computer will turn on the Supplemental Restraint System (SRS) Warning Light if the system will not operate properly or operate outside of intentions. This system is designed to deploy air bags and tighten seat belts when the computer determines the car is in an accident.
What is the SRS system on a Honda Accord?
The SRS, or supplemental restraint system, on your Honda Accord is responsible for deploying the airbag in the event of an accident. If this system is malfunctioning, the airbag may not deploy properly during an accident. However, the system does warn you of a system malfunction.
When to disconnect SCS service connector from SRS light?
3rd Disconnect SCS service connector for MES connector within 4 seconds after SRS indicator light goes off. SRS indicator light will come on again. 4th Reconnect SCS service connector the MES connector within 4 seconds after SRS light comes on.
Where is the SCS connector on a Honda Accord?
We’ve allready done the 1st step by making the SCS Connector. You’ll need to find the MES (Memory Erase Signal) connector. It is a yellow connector with two wires in it that is plugged into the back of the driver’s side fuse box, unplug it and pull it down.
Can a Honda Accord SRS memory be erased?
NOTE: The SRS memory is not erased even if the ignition 2007 Honda Accord 2003-07 RESTRAINTS SRS (Supplemental Restraint System) – Accord me Tuesday, April 28, 2009 9:43:16 AM Page 2 � 2005 Mitchell Repair Information Company, LLC. 3. Use replacement parts which are manufactured to the same standards and quality as the original parts.
Where is the SRS unit on a Honda Accord?
The SRS unit is mounted on the floorboard near the firewall, which is behind the stock radio. To access the unit, remove the center console and two side panels. There is one screw and one clip on the driver’s side. There are two clips on the passenger’s side.
How much does it cost to reset SRS light on Honda Accord?
An SCS Service Connector is used to reset your SRS light, which every Accord owner will eventually end up having to do. The dealer charges anywhere from $65 to $95 to do this, I’ll show you how to do it for under $10.00.
3rd Disconnect SCS service connector for MES connector within 4 seconds after SRS indicator light goes off. SRS indicator light will come on again. 4th Reconnect SCS service connector the MES connector within 4 seconds after SRS light comes on.
We’ve allready done the 1st step by making the SCS Connector. You’ll need to find the MES (Memory Erase Signal) connector. It is a yellow connector with two wires in it that is plugged into the back of the driver’s side fuse box, unplug it and pull it down.