Why is my bandsaw blade twisting?
Bandsaw twisting is almost certainly a case of the blade lacking enough tension. Usually, operators will see this issue after changing blades. Bandsaw blades require quite a lot of tension to perform optimally.
Why does my bandsaw blade twist?
Bandsaw twisting is almost certainly a case of the blade lacking enough tension. Usually, operators will see this issue after changing blades. Bandsaw blades require quite a lot of tension to perform optimally. An inexperienced user might not realize they’ve under-tightened the new blade they’ve installed.
Can a table saw blade be moved out of alignment?
Once you’ve got the blade aligned with the miter slots, you really shouldn’t need to check it again unless you move the saw or do some work on the saw, or there’s an impact, something that might throw the blade back out of alignment.
What happens if your band saw wheel is misaligned?
With a misaligned band saw wheel, the blade will move during the cut, giving you a product that will not reach the proper measurement you need for your project. However, with a little maintenance and alignment, you will be able to fix your band saw and once again create accurate cuts.
How do you align a miter saw to a table?
Simply loosen the screw that holds it in place, adjust it to the correct position, and retighten the screw. Unlock the bevel adjustment. Align your square with the table and blade. Adjust the 90° bolt at the back of the saw until the blade is at true 90°.
Where do you put the blade on a table saw?
Depending on the saw you have, the way you adjust the blade will vary, so you’re going to want to refer to your saw’s owner’s manual. In general, contractor saws, job site saws, hybrid saws, typically, the trunnions are mounted to the underside of the table, and so you’re going to be making the adjustment against the table that way.