What is in a clean agent fire extinguisher?
It is a gaseous solution of 60-80% tetrafluoroethane (R-134a), 10-30% pentafluoroethane (R-125) and 10-30% carbon dioxide (CO2). The Clean agent FS 49 C2 is an extinguishing gas mixture that suppresses fire while maintaining breathable concentrations of oxygen in the air.
What is a clean agent fire extinguisher used for?
CLEANGUARD Clean Agent Extinguishers are designed for the protection of commercial and industrial facilities that typically contain sensitive or irreplaceable equipment and materials that could be damaged or destroyed by water, foam, dry chemical, or carbon dioxide.
Do fire extinguishers need MSDS?
The employer is responsible for ensuring the required labeling of containers and also that Material Safety Data Sheets (MSDS) are available to address the physical and health hazards of fire extinguishers in their workplace.
What is a clean Guard extinguisher?
Description. CLEANGUARD Clean Agent Extinguishers are designed for the protection of commercial and industrial facilities that typically contain sensitive or irreplaceable equipment and materials that could be damaged or destroyed by water, foam, dry chemical, or carbon dioxide.
What is meant by clean agent?
A clean agent is any type of fire extinguishing agent that is electrically non-conductive, volatile, or gaseous, and that does not leave a residue upon evaporation. Clean agent fire suppression systems make use of an inert gas or chemical that is stored in a container and discharged when a fire is detected.
What is clean agent control panel?
Below are some of the most common parts of a clean agent fire suppression system: Control Panel: The control panel is the brains of the system. When it receives a signal from the detectors, it then sends a signal to sound the notification devices and activate the release device to suppress the fire.
Where would a clean agent extinguisher likely be used?
They extinguish the fire by interrupting the chemical reaction of the fire triangle. Clean agent extinguishers are primarily for Class B & C fires. Some larger clean agent extinguishers can be used on Class A, B, and C fires.
What needs a MSDS sheet?
The MSDS lists the hazardous ingredients of a product, its physical and chemical characteristics (e.g. flammability, explosive properties), its effect on human health, the chemicals with which it can adversely react, handling precautions, the types of measures that can be used to control exposure, emergency and first …
Is CO2 a clean agent?
A clean agent is considered an electrically nonconductive, volatile, or gaseous fire extinguishant that does not leave a residue upon evaporation. CO2 and other clean agents such as Novec 1230, FM-200, FE-13, and Argonite are able to safely put out fires without the use of water and don’t leave behind any residue.
What is carbon dioxide extinguisher?
A carbon dioxide (CO2) fire extinguisher is a portable, active fire protection device that works by expelling carbon dioxide onto a fire. It works by displacing the oxygen the fire relies upon to continue burning, and it is primarily used to extinguish fires in which the source of the fuel is a flammable liquid or gas.