How to remove and install an airbag triggering unit?
68 63 19 Removing and installing airbag triggering unit The airbag triggering unit must not be removed with the connector remaining connected. When working on the airbag system, allow a waiting time of at least one minute after switching off the ignition (disconnecting the battery) and removing the connector.
Where is the airbag triggering unit located on a Porsche?
The airbag triggering unit must not be removed with the connector remaining connected. When working on the airbag system, allow a waiting time of at least one minute after switching off the ignition (disconnecting the battery) and removing the connector. The triggering unit is located on the transverse wall above the center console.
What to do if your airbag is not working?
The airbag warning lamp must now display a fault. Read out fault and check if fault code 19 (Airbag warning light: Open circuit, fault not present) is displayed. 3. Erase fault memory. 4. Check if no trim parts, decals or other items are attached on the steering wheel and in the area of the passenger airbag.
How to check operational readiness of airbag system?
68 Checking operational readiness of airbag system 1. Functional check of airbag warning lamp. Switch on ignition. The airbag script must come on for approx. 3 seconds. If the warning lamp does not come on, check bulb 2. Functional check of fault memory.
68 63 19 Removing and installing airbag triggering unit The airbag triggering unit must not be removed with the connector remaining connected. When working on the airbag system, allow a waiting time of at least one minute after switching off the ignition (disconnecting the battery) and removing the connector.
How can I remove the airbag from my car?
You can now remove the airbag. Turn the steering wheel left and right to expose the screws holding the steering column trim in place. Note: some screws can be located on the bottom of the trim. Pry off the bottom of the trim with a plastic spreader tool of a flat head screwdriver.
How do you install an airbag harness on a car?
You can now install the harnesses and airbag, making sure the bolts are hand-snug and you’re not binding with anything. Reinstall the lower trim piece and reconnect the negative battery terminal and turn on the car. You should no longer have an airbag light on and your horn will now work. Hooray!
Do you have to splice into airbag wires?
With a universal kit, you’ll have to splice into the wires, which I wouldn’t advise if you’re a novice or don’t have a wiring diagram in front of you. The last thing you want is wires crossed in an airbag system, especially if that determines whether or not the airbag deploys on a passenger.