What is a brake diagram for a DS?
The brake diagram I posted is for 86-93 model DS. Of course I am certain it will also describe others. Here is what the service manual for that specific year says:” 1. Loosen the brake cable at the equalizer and turn the brake shoe adjusting screw (5) outward to reach the brake shoes (6) until the brake drum (9) clears the shoes. 2.
How do you install a park brake lever?
Park brake lever on the cable Start here: lube park lever pin and wavy washer, install thru rear shoe, add the “Jesus clip” Lube Starwheel shaft & threads with chassis grease or moly lube; thread the adjuster together but do not tighten star wheel end goes toward rear shoe. NOTE!
How does rear disc caliper work with parking brake?
If the parking brake uses the rear discbrake shoes instead of a separate set of drum brake shoes, there is a mechanism in the caliper piston cylinder to push the piston and apply the rear brakes when the driver operates the linkage.
How do you install a drum brake assembly?
put guide on anchor. place SA arm with pivot on rear shoe with nail, tube washer & straight spring Add actuator link, follow with overide spring from arm to pivot (next pic) Place return spring under SA arm. note placement of pivot and link Press shoes against anchor. Install front shoe return spring to anchor.
How do you remove the parking brake from a car?
1) Pull down and release the parking brake. 2) Remove the two mounting bolts and remove the brake caliper assembly. 3) Suspend the brake caliper assembly so that the hose is not stretched. 4) Remove the disc rotor.
If the parking brake uses the rear discbrake shoes instead of a separate set of drum brake shoes, there is a mechanism in the caliper piston cylinder to push the piston and apply the rear brakes when the driver operates the linkage.
How do you adjust the parking brake lever?
LEVER STROKE 1) Remove the console box lid. 2) Forcibly pull the parking brake lever 3 to 5 times. 3) Adjust the parking brake lever by turning adjust- er until parking brake lever stroke is set at 7 to 8 notches with operating force of 196 N (20 kgf, 44 lb). 4) Tighten the lock nut. 5) Install the console box lid.
How long does it take for parking brake to cool down?
(1) Drive the vehicle at about 35 km/h (22 MPH). (2) With the parking brake release button pushed in, pull the parking brake lever gently. (3) Drive the vehicle for about 200 meter (0.12 mile) in this condition. (4) Wait 5 to 10 minutes for the parking brake to cool down. Repeat this procedure once more.