What does a 8520 tractor weigh?
John Deere 8520 Dimensions
John Deere 8520 Weight | |
---|---|
Shipping: | 23,050 lbs 10455 kg |
Operating: | 23,800 lbs 10795 kg (480/80R46 duals) |
Max Drawbar: | 4,900 lbs 2222 kg |
10,000 lbs 4536 kg (with HD support) |
How many HP is a JD 855?
John Deere 855
John Deere 855 Power | |
---|---|
Engine: | 24 hp 17.9 kW |
PTO (claimed): | 19 hp 14.2 kW |
How many HP is a JD 8200?
John Deere 8200
John Deere 8200 Power | |
---|---|
PTO (claimed): | 180 hp 134.2 kW |
Drawbar (tested): | 159.63 hp 119.0 kW |
PTO (tested): | 202.33 hp 150.9 kW |
power test details … |
How much HP does a JD 7800 have?
John Deere 7800
John Deere 7800 Power | |
---|---|
Engine (net): | 170 hp 126.8 kW |
PTO (claimed): | 145 hp 108.1 kW |
Drawbar (tested): | 131.99 hp 98.4 kW |
PTO (tested): | 158.97 hp 118.5 kW |
What engine is in a John Deere 8200?
John Deere 8200 used a 7.6 liter 6 cylinder turbo diesel intercooled 210 hp. This engine was replaced in 1995 by a 8.1 liter 6 cylinder turbocharged engine with intercooler and electronically controlled fuel injection. A 40 km / h full powershift 16 + 5 was the standard transmission.
How much does a 8200 John Deere tractor weight?
John Deere 8200
Dimensions & Tires | |
---|---|
2WD Wheelbase: | 122.8 inches 311 cm |
Weight: | 16457 to 18928 pounds |
Front tire: | 11.00-24 |
2WD Rear tire: | 18.4R46 |
How much horsepower does a John Deere 7215R have?
215 horsepower
The 7215R model comes complete with an engine capable of 215 horsepower, and a PTO horsepower of 178. The machine comes with hydrostatic power, four wheel drive and a new Command View II Cab for optimal view and control.
How much horsepower does a John Deere 7810 have?
John Deere 7810
John Deere 7810 Power | |
---|---|
Engine: | 175 hp 130.5 kW |
PTO (claimed): | 150 hp 111.9 kW |
Drawbar (tested): | 139.47 hp 104.0 kW |
PTO (tested): | 167.58 hp 125.0 kW |
How much can a John Deere 4100 Lift?
John Deere 4100 Attachments
John Deere 410 Loader | |
---|---|
The model 410 loader fits the 4100 with four-wheel drive. | |
Breakout force (at 500mm): | 1500 lbs 680 kg |
Breakout force (bucket): | 1661 lbs 753 kg |
Lift to full height (at pin): | 882 lbs 400 kg |
Can you put a backhoe on a John Deere 4100?
Kenny Am I correct that that the 4100 does not have a frame but is only connected by the engine and rear end and that if you use a backhoe the connections may break on the castings. Using a hoe either 3 pt or sub fame will not work on the 4100 or is not advised to be done by Deere.