What is a pond standpipe?
A standpipe is used to control the level of water in ponds. It serves as an adjustable drain, allowing the pond owner or manager to drain any water above a controllable level. Larger ponds can use pipes as large as 1 foot in diameter. Keep in mind that a large pipe may flood the drainage area.
How do you measure a pond spillway?
Your SCS representative can provide guide- lines for sizing either type of spillway, but a good rule is to make an excavated spillway width equal to at least 10% of the length of the levee. For long, narrow ponds, increase this amount.
How do you control a pond overflow?
Other ways to stop your pond overflowing You can add a gravel area around the edge of your pond to help drain away excess water, install a retaining wall at the lowest part of the pond or build a dry creek bed down from your pond to help move the water away.
Does a pond need a spillway?
Large ponds will need a spillway soon after the overflow pipe system is shut off. Building a natural spillway is like creating a stream. You want to dig a shallow channel with an inlet level at the desired pond water level.
What is the best way to drain a pond?
Probably the easiest way to drain a pond is to use your pond pump, with submersible models being the preferred choice to due to easier drainage. To start emptying a pond using a submersible pump you just need to position the out-take hose into your garden or the area you want water drained.
How can I drain my pond without a pump?
Take your garden hose and connect it to a spigot. Make sure this is a lengthy garden hose which can extend between the pond and the place where the water will be released. If your hose is not long enough, then use a hose extension or an additional hose. Next, take the hose’s free end and connect a nozzle to it.
Will my pond overflow in heavy rain?
In my case, I left one part of the pond edge about an inch or so lower than the rest of the rim, and used smaller rocks to edge that section. A heavy rain would simply overflow in this area, which leads to a shallow drainage ditch.
What is a stand pipe?
stand·pipe | \\ˈstan(d)-ˌpīp \\. : a high vertical pipe or reservoir that is used to secure a uniform pressure in a water-supply system.
How do you drain a duck pond?
Put the hose in the pond (use a weight to keep it on the bottom), turn the water on and once it starts running into the pond turn it off and disconnect it. When the water starts running out the end of the hose it will create a siphon and drain the pond.
What is a pond dam?
A retaining system for water, a pond dam helps create or expand an artificial pond. The dam and a spillway are aesthetically pleasing additions to a pond, but they also serve the important function of water regulation.