Can you change the headlight bulb on a Honda Pilot?
If your Pilot has this type of bulb, we do not recommend that you attempt to change it yourself.
What to do when your low beam headlight blows out?
You can often tell when a headlight blows out while you’re driving, but confirm which bulb has actually blown out by leaving your headlights on and getting out of the vehicle to check. Then get back in your vehicle and turn on your high beams. Some vehicles use a single bulb for both high and low beams while others do not.
What can cause a low beam headlight to be dim?
If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?
Is the HighBeam the same bulb as the headlight?
In some Hondas, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Hondas have high intensity discharge headlights, sometimes referred to as xenon lights.
How to change a burnt out headlight bulb on a Honda Pilot?
This free video shows how to change a burnt out headlight on a 2013 Honda Pilot EX-L 3.5L V6. Complete instructions for replacing a head light bulb on a 2013 Honda Pilot EX-L 3.5L V6 Intake duct comes off. Remove the hold-down bolts for the battery, and you can move it back slightly to make just enough room.
Is it possible to fix a bad low beam headlight?
Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.
How do you remove a headlight assembly bracket?
If you have to remove any bolts from a headlight assembly bracket, make sure to keep them someplace safe until you reassemble that portion of the car. In some vehicles, you will need to unbolt the headlight assembly and slide it out of the car to access the headlight bulb itself in the back. Disconnect the wires going to the headlight.
Do you need to replace both high and low beams?
Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.