What is a suitable finish for plywood flooring?
Any type of plywood used for flooring should be finished properly. Even plywood with waterproof glue can benefit from finishing. You don’t need to put a glassy finish on the plywood, only seal it against moisture penetration. The edges of the plywood, even if the plywood is rated waterproof, are not sealed.
Can plywood be used as finished flooring?
Get the facts and then go on to gorgeous DIY results with this inexpensive alternative to hardwood. Once reserved for subfloors and sheathing, construction-grade plywood is now making a splash as affordable residential finish flooring.
What do you seal plywood floors with?
One way to preserve plywood flooring is to coat it with layers of clear sealant, which will prevent the plywood from becoming damaged by moisture or wear. Sealant can be painted over a plywood floor using tools that are readily available at any hardware store, such as paint rollers.
Does plywood look good stained?
Plywood can be stained in many different colors. When building with plywood, you will often want to stain and finish the surface to enhance your project’s beauty. Staining plywood typically requires the use of special gel stains, but by preconditioning the wood you can use any wood stain.
How do you seal plywood indoors?
How to Seal Plywood
- Sand all sides of the plywood using 80-grit sandpaper.
- Repeat sanding with 120-grit sandpaper.
- Apply sanding sealer in even brush strokes to coat the surface of the wood, using a clean paintbrush.
- Use 120-grit sandpaper again to lightly sand the sealed surface.
What do you use to fill gaps in plywood subfloor?
Fill Plywood Subfloor Gaps An effective strategy for filling large gaps is to mix patching compound to a stiff, mortar-like consistency, trowel it into the plywood subfloor gaps and wait for it to stiffen before troweling it smooth. Some sanding may be needed when it sets completely.
How do you fill gaps in plywood subfloor?
Do you nail or screw subfloor?
Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.