What joints are used for cabinets?

What joints are used for cabinets?

The most accepted-and best-method is the dowel joint, in which two pieces of wood are joined by glue and two dowels, which protrude into the wood. A mortise-and-tenon joint connects the wood with one piece of wood carved out and extended into the other piece of wood.

How thick should cabinet carcass be?

Use 1/4-inch plywood for the cabinet back unless it will support the weight of the cabinet, in which case 1/2 inch is a better choice. Select 1/2-inch plywood for drawer sides, fronts and backs, but 1/4 inch is suitable for drawer bottoms. Plain front plywood doors are rare, but they can be made from 3/8-inch plywood.

How do I make Dado cabinets?

1. Step 1: Cut your dados. Use a plunge router and guides to ensure your dados are straight.
2. Step 2: Attach bottom. Apply wood glue to dados for the cabinet bottom making sure to coat all three sides of the cutout.
3. Step 3: Attach Back Cleat.
4. Step 4: Attach Top Cleats.
5. Step 5: Attach Back.
6. Step 6: Build and Attach Faceframe.

What are kitchen cabinet carcasses made of?

There are four main groups which most carcass materials will fall in to. These are; MFC (or melmine faced chipboard), real wood veneered MDF, Birch plywoods and solid timber construction.

Should I use half inch or 3/4 inch plywood?

In my experience building cabinets and drawers, 1/2 plywood only becomes useful for drawer sides, sometimes, bottoms, and cabinet backs. However, if you’re working on shelves, fronts, and panels, it would be best to use 3/4 plywood for better strength.

How do you make a dado and tongue joint?

The first step is to cut a dado in the cabinet or bookcase side. The tongue will fit into this dado. The second step involves cutting the tongue. The tongue makes up the other half of the joint and is made by cutting a rabbet at the end of the workpiece, as in photo detail ‘b.