How do I identify my Mopar engine?
Casting numbers for the small-block Mopar and big-block Mopar engine blocks can be found on the left (driver’s) side of the block, and will consist of seven numerals. These numbers are different than the stamped eight-digit number found on the right side of the engine.
How do I identify a Dodge V8 engine?
The engine number can be found on the left side of the motor above the starter motor. First Digit: All V8’s fitted to V and C model vehicles and small block “Phoenix and Dodge trucks have an “A” prefix.
How do I know if I have a 318?
Used in most Chrysler models, including Dodge, the 318 is identified by locating the casting numbers found on the engine block. According to Year One’s Engine Casting Number Page, “Each engine displacement had a unique, or set of unique, casting numbers on the block.
How do I identify a Chrysler motor?
On the “A” and the “LA” engines it is stamped on the drivers side front of the block just below the cylinder head. On the “B” engines it is stamped on the top of the block near the distributor. On the “RB” engines it is stamped on top of the block forward of the intake manifold on the drivers side.
How do you read a Mopar fender tag?
As a general rule, fender tags are read from bottom-to-top and left-to-right. The fender tags of 1962-66 cars are laid out in a very similar fashion. The scheduled build date is under the left portion of the “SO NUMBER”.
How do you tell if I have a 318 or 360?
There is a casting number on the side of the block behind the starter that will look something like this XXXXXXXX-318-XX. The displacement is the 3 numbers between the 2 dashes, i.e. 273, 318, 340, 360. Chances are you have a 318 since they were far from gutless, even in the ’70s. Hope this helps.
What liter is a 318 Dodge motor?
5.2 L
Displacement: 318 cu in (5.2 L)
How do you tell if you have a 318 or 360?
What year is a 318 engine?
The 318 debuted in 1967 but was not blessed with a four-barrel until over a decade later in 1978.