What kind of adapter do I need for Honda Civic fuel gauge?
The fuel pressure test gauge is connected to one of the fuel filter’s banjo bolts with a fuel pressure test adapter. This adapter must have a 1.0mm thread pitch and is usually labeled as: Honda M8x1.0 banjo bolt (or Import M8x1.0) adapter.
Where is the fuel filter on a Honda Civic?
Locate and remove your fuel pump fuse. The filter is located right next to the positive battery terminal. If metal tools accidentally contact the hot side of your battery, it will cause sparks and an open fuel line next to an ignition source is potentially hazardous.
What should I do if I spilled fuel in my Honda Civic?
Wipe down any spilled fuel, and reconnect your battery cable. Insert the fuel pump fuse back in its place, and start your car. Figure 5. Make sure to use new washers with your banjo bolt. Avoid over tightening your fuel lines. Stripped threads lead to fuel leaks.
How to test the fuel pump in a Honda?
Although the above list is a not a very complete list of symptoms, the theme that runs thru’ them, and any other related symptom, is that the engine will crank and crank, but not start. The first test I’m gonna’ explain is the easiest one to do, although it’s not the most accurate.
The fuel pressure test gauge is connected to one of the fuel filter’s banjo bolts with a fuel pressure test adapter. This adapter must have a 1.0mm thread pitch and is usually labeled as: Honda M8x1.0 banjo bolt (or Import M8x1.0) adapter.
How do you change timing belt on Honda Civic?
Open the coolant cap on top of the radiator. Turn the petcock at the bottom of the radiator to drain the coolant into drain pan. Squeeze the rubber radiator hoses to remove any excess fluid that may be trapped. Figure 3. Radiator being drained. To access the timing belt cover and related components, the cover needs to come off.
Why does my Honda Civic have no fuel?
Confirming power to the fuel pump (with a multimeter) also verifies that the fuel pump has failed and needs to be replaced. If no voltage is present, as your helper cranks the engine, then the cause of no fuel condition is due to either a bad fuse, fuel pump relay (known as the Main Relay).
How do you replace the water pump on a Honda Civic?
Because the water pump will be replaced, it’s important to clear the system of the old coolant. Open the coolant cap on top of the radiator. Turn the petcock at the bottom of the radiator to drain the coolant into drain pan. Squeeze the rubber radiator hoses to remove any excess fluid that may be trapped.