What does EIGRP stub connected summary mean?
Connected: allows the stub router to advertise directly connected networks. Static: allows the stub router to advertise static routes (you have to redistribute them). Summary: allows the stub router to advertise summary routes. Redistribute:allows the stub router to advertise redistributed routes.
What is EIGRP stub router?
OVERVIEW. Enhanced Interior Gateway Routing Protocol (EIGRP). Stub Router functionality, which Cisco introduced in Cisco IOS® Software Release 12.0(7)T, provides network architects with greater flexibility for designing EIGRP networks by enabling improved control over traffic flows and limitations of query flooding.
What is a stub routing?
Stub routing is commonly used in only hub-and-spoke network topologies. In a hub-and-spoke network, one or more end (stub) networks are connected to a remote device (the spoke) that is connected to one or more distribution devices (the hub).
What is a stub site?
A stub network, or pocket network, is a somewhat casual term describing a computer network, or part of an internetwork, with no knowledge of other networks, that will typically send much or all of its non-local traffic out via a single path, with the network aware only of a default route to non-local destinations.
What is a stub router?
Per Wiki: A Stub router, One-armed router or router on a stick is a router that routes traffic between virtual local area networks (VLANs). It has only a single Ethernet NIC that is part of two or more Virtual LANs, enabling them to be joined. unless a “stub router” is required to be connected to a switch.
What is Eigrp OTP?
EIGRP OTP (Over the Top) allows you to run EIGRP between routers that are not directly connected. With EIGRP OTP, you can configure everything on your own routers as long as you are able to reach the remote router(s).
Which two routing protocols can be redistributed into OSPF by a Cisco router?
It is a Link state routing protocol. IP EIGRP and RIPv2 can be redistributed into OSPF by a Cisco router.
Which OSPF LSA type is used to advertise routes redistributed into an OSPF domain?
Type 5
LSA Type 5 – OSPF ASBR External LSA This external route/prefix is redistributed in to the OSPF network by the ASBR (R1) and seen as O E1 or E2 entries in other OSPF routers routing tables.