Where is the light in a Sub-Zero refrigerator?
In all models except 501 and 601, the light switch is mounted to the top mainframe. In models 501 and 601, the switch is mounted to the bottom mainframe above the unit grille.
Why is the light off in my Subzero refrigerator?
If the lights are out inside a refrigeration product: Verify the unit is turned on and power is going to the product. If accessible, confirm the unit is plugged into the electrical outlet. Turn the home circuit breaker to the unit off for 10 seconds then back on again.
How do you change a lightbulb in a Sub-Zero refrigerator?
Pull the diffuser outward to remove it. Remove the old bulb at the top of the drawer compartment by twisting counterclockwise. Replace with a new 25-watt appliance bulb by twisting it clockwise to lock in place. Return the light diffuser to its place by pushing it down in its slots.
What is Sub-Zero Sabbath?
While in Sabbath Mode, the Classic series (BI) Sub-Zero will disable the lights, ice maker, door alarm, and dispenser. There is no harm in leaving the unit in Sabbath Mode. In the event of a power failure, when power returns, the unit will return to this mode.
How do you remove the light cover on a subzero refrigerator?
To remove a light bulb:
- Remove the overhead light diffuser: Pull the two clips down toward the back underside of the light diffuser. Lift and slide the light diffuser back toward the rear of the unit slowly.
- Twist the bulb counterclockwise to remove.
Where is the freezer light switch?
Depending on the model, freezer light, fan, or ice maker switch for an over-and-under unit is located on the back wall of the unit behind the ice bin or beneath the ice maker. Replacing the freezer light, fan, or ice maker switch could be difficult.
What does Lo c mean on Sub Zero fridge?
Answer: “L0 C” appears on a Classic Series (BI) product when a command was entered at the control board while the unit believed the door was closed. It should appear only when the door switch is closed.
How do I turn my Subzero fridge back on?
Turn the home circuit breaker to the unit off for 10 seconds then back on again. Retest the unit operation. Verify unit’s power cord is securely plugged into electrical outlet. Unplug unit and plug back into outlet.
Why does my Wolf oven says Sabbath?
“SAb” will appear and flash on oven control knob indicating Sabbath Mode has been initiated. Once the oven reaches the preset temperature, the unit will stay at that temperature unless it is changed manually. To change the oven temperature while in Sabbath Mode, turn the control knob.
How do you turn off Sabbath Mode in subzero?
To exit Sabbath Mode and return to normal operating conditions, press UNIT ON/OFF. The lights turn on and normal operation is restored.