How much oil does a GX270 Honda Motor take?
Specifications
Engine Type | Air-cooled 4-stroke OHV |
---|---|
Governor System | Centrifugal Mass Type |
Air cleaner | Dual element |
Oil Capacity | 1.16 US qt (1.1 L) |
Fuel Tank Capacity | 5.6 U.S. qts (5.3 liters) |
How do you check the oil on a Honda GX270?
ENGINE OIL LEVEL CHECK
- Remove the filler cap/dipstick and wipe it clean.
- Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.
- If the oil level is low, fill to the edge of the oil filler hole with the. recommended oil (see page 26).
How many horsepower is a GX270 Honda Motor?
270 cm3 Net
Features
GX240 | GX270 | |
---|---|---|
Displacement | 270 cm3 | 270 cm3 |
Net Power Output* | 7.9 hp (5.9 kW) @ 3,600 rpm | 8.4 hp (6.3 kW) @ 3,600 rpm |
Net Torque | 13.4 lb-ft (18.3 Nm) @ 2,500 rpm | 14.1 lb-ft (19.1 Nm) @ 2,500 rpm |
PTO Shaft Rotation | Counterclockwise (from PTO shaft side) | Counterclockwise (from PTO shaft side) |
What is a Honda GX270?
The GX270 engine is suitable for a wide range of heavy-duty applications such as construction equipment, tillers, generators, welders, pumps and other industrial applications. Engine features: The OHV design enhances combustion efficiency.
How many horsepower is a GX270 Honda?
Features
GX240 | GX270 | |
---|---|---|
Net Power Output* | 7.9 hp (5.9 kW) @ 3,600 rpm | 8.4 hp (6.3 kW) @ 3,600 rpm |
Net Torque | 13.4 lb-ft (18.3 Nm) @ 2,500 rpm | 14.1 lb-ft (19.1 Nm) @ 2,500 rpm |
PTO Shaft Rotation | Counterclockwise (from PTO shaft side) | Counterclockwise (from PTO shaft side) |
Compression Ratio | 8.5:1 | 8.5:1 |
What kind of oil does a Honda GX270 use?
The Honda GX270 K1 engine has a cast iron cylinder sleeve, ball bearing supported the crankshaft and heavy-duty balancer shaft. The piston has two compression rings and a single oil ring. The Honda 4-stroke or an equivalent (SG.SF/CC.CD) SAE 10W-30 engine oil, is recommended for the GX270.
What is the compression ratio on a Honda GX270?
The cylinder bore is 77.0 mm (3.03 in) and the piston stroke is 58.0 mm (2.28 in). The compression ratio rating is 8.2:1. The Honda GX270 K1 engine has a cast iron cylinder sleeve, ball bearing supported the crankshaft and heavy-duty balancer shaft. The piston has two compression rings and a single oil ring.
How many horsepower does a Honda GX270 T2 have?
The engines have new features: The Honda GX270 T2/UT2 produces 8.51 PS (8.4 HP, 6.3 kW) at 3600 rpm and 19.1 Nm (1.94 kg·m, 14.1 ft·lb) of torque at 2500 rpm.
What kind of oil does a Honda lawn mower use?
Under normal operating conditions, where the air temperature is between 0 and 100 degrees Fahrenheit, Honda recommends using SAE 10W-30 oil. If you plan to use your mower for long periods of time in temperatures above 90 degrees, however, use SAE 30 to reduce internal wear.