How do you close the sunroof on a 2003 Honda Civic?
To close the moonroof, just push forward on the close button. Push firmly and the moonroof will automatically close all the way. Push lightly and it will close manually (letting go part way leaves the moonroof partially open). To tilt the moonroof open at the back, just push the middle button.
Why does my Honda sunroof not close properly?
However, many Hondas use a recessed track that easily collects and traps dirt and debris. When this happens, your sunroof may not close and seal properly. Another minor problem is a blown fuse on some model years of Honda vehicles.
How to close the moonroof on a Honda Accord?
Check if the AUTO OPEN and AUTO CLOSE function still work. If they still work, the AUTO functions have not been cleared, go back to step 1. If AUTO functions have been cleared, go to step 7. Press and hold the moonroof close switch until the moonroof is titled fully opened.
Where is the fuse on a Honda sunroof?
Pull the fuse for the sunroof out of the fuse panel using the fuse pullers in the fuse panel. Use the diagram on the underside of the fuse panel cover if you are having trouble locating the fuse for the sunroof. Check the metal strip in the middle of the fuse. The strip should not be burned or damaged.
However, many Hondas use a recessed track that easily collects and traps dirt and debris. When this happens, your sunroof may not close and seal properly. Another minor problem is a blown fuse on some model years of Honda vehicles.
Why is my moonroof not working on my Honda Accord?
I was having trouble with my moonroof closing properly. The AUTO OPEN/CLOSE worked, but after the moonroof stopped closing the rear of the roof would either be tilted slight up (about 1/4″) or too low (about 1/8″).
Pull the fuse for the sunroof out of the fuse panel using the fuse pullers in the fuse panel. Use the diagram on the underside of the fuse panel cover if you are having trouble locating the fuse for the sunroof. Check the metal strip in the middle of the fuse. The strip should not be burned or damaged.