What engine is the b18c1?
| Honda B engine | |
|---|---|
| Compression ratio | 8.8:1-11.1:1 |
| RPM range | |
| Redline | over 8,500 |
| Combustion |
Is B18C1 a good engine?
I would say the B18C1 is better. It has a slightly better rod ratio (1.57:1 vs 1.54:1), piston oil squirters, knock sensor protection, and stronger overall construction. By the way, it does NOT have less torque than the B18B. In fact, it is rated as having 1 more ft-lb stock.
What kind of engine does a Honda Integra B18C have?
For the B18C 98 Spec R engine, the 4-1 header was used. The power was 200 HP @ 8,000 rpm; and the torque was 186 Nm @ 7,200 rpm. This engine can be found in Honda Integra Type R. The B18C Type R engine can be identified by the red valve cover, the 4-1 header, and an intake collector. 8. B18C1 was an engine for USDM Acura Integra GSR.
What kind of engine is in a Honda Civic?
Honda B18 engine The Honda B18 engine is built as a pure DOHC engine for the most part as a VTEC engine in compact cars from Honda. It is found in the Civic, CRX, CRX Del Sol, Integra, CR-V and some other models. The displacement ranges from 1,797 cc to 1,834 cc The power range is from 126 to about 200 hp for the JDM Type R.
What kind of transmission does a Honda B18C use?
B18C/B18C5: If your engine is a 92-93 B18A or B17A, the one that came with the engine, but for the other engines, any of the cable clutch operated B-series transmission including Japanese or American market S1, J1, A1, Y1 or YS1. Mounts: Hasport bolt in mount kit p/n #M88-B16-10.
What are the specs of a Honda Civic B18C?
The power was 142 HP @ 6,300 rpm and the torque was 172 Nm @ 5,200 rpm, with the rev limit of 7,200 rpm. This engine was intended for Acura Integra, Honda Integra, JDM Honda Domani and Orthia. 3. B18B2 was the B18B1 for Australia 4. B18B3 was the version for Honda Civic for South Africa and the Middle East.
B18C/B18C5: If your engine is a 92-93 B18A or B17A, the one that came with the engine, but for the other engines, any of the cable clutch operated B-series transmission including Japanese or American market S1, J1, A1, Y1 or YS1. Mounts: Hasport bolt in mount kit p/n #M88-B16-10.
What kind of ECU does a Honda Integra have?
PR2 – The first EDM Honda on our list, the 1988-1991 Honda ZC engine is the one that uses this PR2 ECU. PR3 – Earliest models of the Integra used this ECU, specifically the 1989-1991 Acura XSi/RSi trims.
Can a Honda Integra be swapped with a Honda Civic?
All Integra’s 1994 and up and Civic’s 1992 and up all use hydraulic transmissions. Therefore its not compatible with 4th Gen Civic’s because these vehicles have cable transmissions. To complete the swap a B-series cable transmission will need to be used or a cable-hydro transmission conversion will need to be made.
What kind of engine does a Honda Civic have?
This list includes most inline 4-cylinder engines only, starting in alphabetical order from A-series on. The A16A1 was a Carbureted 1.6 litre engine used in the 1982-1985 Honda Accords in North America and in some of the 1986-1989 Accords in the non-USDM market.