What is a J37 engine?
J37 may refer to : Honda J37, a 3664 cc car engine. Lockheed J37, the first turbojet engine designed in the United States. Studer J37, a recorder used to record the Beatles’ Sgt. Pepper album in 1967.
Why does the Honda J35 have a smaller crankshaft?
These engines are a V6 and were designed to be transversely mounted. Not only do they have shorter bore spacing, but they also have shorter connecting rods. These engines also have a smaller crankshaft than the C-series. The reason the crankshaft is smaller is to make the engine smaller altogether.
How much horsepower does a Honda J35A3 have?
The J35A3 also featured the compression ratio increased to 10, a new ECU, and VTEC was activated after 4,100 rpm. All this improved the features, and now the power reached 243 HP @ 5,300 rpm, the torque was 332 Nm @ 3,000 to 5,000 rpm. The J35A3 engine was installed in Acura MDX and Saturn Vue.
Are there any problems with the Honda j37a engine?
Reliability of the J37A engine is not much different from the popular Honda J35. HERE we have shown the most common problems on the J series. Fans of boosting the power of the engine have nothing to do here, it will be next to impossible to find any J37A performance parts. It is better to pick another car for this purpose.
What kind of alloy is the Honda J37 made out of?
The J37 uses a die-cast aluminum block with aluminum cylinder liners. Primarily due to the cylinder liners being made from aluminum instead of cast-iron the engine weighs less than the J35Z engines. The intake manifold is made from a cast magnesium alloy.
These engines are a V6 and were designed to be transversely mounted. Not only do they have shorter bore spacing, but they also have shorter connecting rods. These engines also have a smaller crankshaft than the C-series. The reason the crankshaft is smaller is to make the engine smaller altogether.
The J35A3 also featured the compression ratio increased to 10, a new ECU, and VTEC was activated after 4,100 rpm. All this improved the features, and now the power reached 243 HP @ 5,300 rpm, the torque was 332 Nm @ 3,000 to 5,000 rpm. The J35A3 engine was installed in Acura MDX and Saturn Vue.
Reliability of the J37A engine is not much different from the popular Honda J35. HERE we have shown the most common problems on the J series. Fans of boosting the power of the engine have nothing to do here, it will be next to impossible to find any J37A performance parts. It is better to pick another car for this purpose.
What are the valve clearances on a Honda J35?
Valve clearances for a cold engine are 0.24-0.26 mm for intake and 0.28-0.32 mm for exhaust valves. The Honda J35 firing order is 1-4-2-5-3-6. The first modification of J35A had a 55 mm throttle body. This engine was gradually improved and the main differences between the modifications are shown below.