What is the minimum mounting height for a main panel?
General Requirements for Panel Installation This space must be at least 6.5 feet high and three square feet away from the wall, and must have a 30-inch width. This allows for safe, simple service when needed.
How high can a main breaker be?
6 feet, 7 inches
A. Circuit breakers and fuses must be readily accessible, and they must be installed so the center of the grip of the operating handle of the fuse switch or circuit breaker, when in its highest position, isn’t more than 6 feet, 7 inches above the floor or working platform, unless the installation is for [240.24(A)]:
What height should an electrical panel be?
An electrical panel must be installed at least 4 feet off the ground, but cannot be higher than 6 feet. You need to also allow for the panel door to open at least 90 degrees.
What is the minimum height of a main breaker?
The center of the main breaker handle, cannot be higher than 6′ 7″. Check with the local building department, as they may have a minimum height. Practically speaking, you’ll want it at a comfortable height to work in. You’re not going to want to sit, or kneel on the floor while working in the panel.
What is the standard height of panel board from finished floor?
1.50 M
PANELBOARD – 1.50 M ABOVE FINISH FLOOR b. CONVENIENCE OUTLET – 0.30 M ABOVE FINISH FLOOR. a. LIGHT SWITCH – 1.20 M ABOVE FINISH FLOOR MOUNTING HEIGHT OF WIRING DEVICES SHALL BE AS FOLLOWS : 8.
What is maximum mounting height for electrical panel?
A height limit applies to mounting a panel box. The circuit breaker at the top of the box may not be higher than 6-foot 7-inches from the floor. A permanent platform must be below the panel box if the top circuit breaker exceeds this specific height.
How much clearance is needed around an electrical panel?
The Occupational Safety and Health Administration (OSHA) and the National Electrical Code (NEC), require that electrical panels have a minimum of 3 feet (36 inches) of clearance and a minimum headroom of 6.5 feet or the height of the equipment whichever is greater.
How tall does an electrical panel need to be?
The electrical equipment itself may have a height that is less than 6 1 / 2 feet, but if it is mounted so the top of the equipment is higher than 6 1 / 2 feet, the minimum working space height shall be the equipment height. For example, a panelboard is installed next to a disconnect (safety) switch on a concrete block wall.
How tall is a standard circuit breaker panel?
The maximum height for an electric meter is six feet from the ground to the center of the box. how high is a breaker panel? Height. The minimum height for a circuit breaker box is 4 feet, though the ideal height is between 5 feet and 6 feet.
How tall does a panel have to be to be a permanent platform?
Mounting Height A height limit applies to mounting a panel box. The circuit breaker at the top of the box may not be higher than 6-foot 7-inches from the floor. A permanent platform must be below the panel box if the top circuit breaker exceeds this specific height.
How tall should a sub panel panel be?
Sub Panel – NEC code. The mounting height should be 6’6″ to the center of the panel.