Where do I put the shift lock on my car?

Where do I put the shift lock on my car?

Most cars have a means of overriding the shift lock to put the car in gear so you can drive to a mechanic for repairs rather than having it towed. A small door with a cover is often found on the console next to or close to the shifter itself.

What do you do when your shifter is stuck in Park?

By law, all 2010 and newer vehicles are equipped with brake-shift interlock. 1) Set the emergency brake. 2) Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever.

How do you change the shifter on a Honda Accord?

Use the Phillips screwdriver to remove four screws that hold the shifter indicator console in place. Pull up on the console, and slide it out of clips that are further holding it in place. Slide console out from under the outer console shell, and then off of the shifter itself.

Where is the shift interlock solenoid on a car?

The shift interlock solenoid is located underneath the shifter console right alongside the shifter lever. To access the shift interlock solenoid, you must remove the center console.

Why does my Honda Civic not shift out of Park?

If it is defective or needs adjustment, the brake lights won’t come on when you depress the brake pedal, the car won’t shift out of park, and may even not start (not sure about this year and model as far that symptom goes: there might be something else going on with the car).

Where is the switch on a Honda Civic?

The switch is a rectangular plastic box with a plastic button, located behind the brake pedal.

What causes shift lever to get stuck in Park?

If the shift interlock solenoid is not working properly, your shift lever will get stuck in park. First, try to listen for the shift interlock solenoid engaging when you press the brakes. If you hear a little click coming from the shift lever, you can be certain that it’s working properly.

By law, all 2010 and newer vehicles are equipped with brake-shift interlock. 1) Set the emergency brake. 2) Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever.