Why will my Samsung dryer turn on but not start?
If your Samsung dryer lights up but won’t start, make sure the door is properly closed and latched. As a safety precaution, the drying cycle won’t begin until the door is closed and the latch is engaged. To engage the latch, close the door firmly and make sure loose clothing isn’t interfering with its closure.
How do I reset the control panel on my Samsung dryer?
Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
What are the codes on a Samsung dryer?
Error Codes Explained
| Fault Code | Clothes Dryer Problem |
|---|---|
| dF | Door circuit failure |
| Od | Excessive drying time |
| FE | Problem with power supply |
| tS or tO | Defective temperature sensor (electrically shorted or electrically open) |
How do you reset the ventilation sensor on a Samsung dryer?
Reset your dryer Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
Where is the start switch on a Samsung dryer?
Locate your dryer’s start switch. It will be located under the control console panel on top of your dryer. To gain access under the control panel, you will have to remove the screw(s) located at either end of the control panel.
What would cause my Samsung dryer to not heat up?
The Samsung dryer heating issue can be due to the blocked vent, worn-out wires, faulty heating element, or thermal cut out fuse. We suggest you check the clogged the air vent and heating element as they are the source of the problem in most cases.