What is HPE onboard administrator?

What is HPE onboard administrator?

The HPE Onboard Administrator for the HPE BladeSystem enclosures is the intelligence of the c-Class infrastructure. Together with the enclosure’s display (HPE Insight Display), the Onboard Administrator has been designed for both local and remote administration of HPE BladeSystem c-Class enclosures.

How do you access administrator on HP board?

Remote access to the Onboard Administrator

1. Open a command-line window from a network-connected client.
2. At the prompt, telnet to the IP address of the Onboard Administrator and press Enter.
3. Enter a valid user name and press Enter.
4. Enter a valid password and press Enter.
5. Enter commands for the Onboard Administrator.

How do I reset my HP Onboard Administrator?

Press and hold in the onboard administrator reset button for 5 seconds. To boot the system into lost password modem press L. The password appears as the system reboots. Alternatively, to reset a password on the onboard administrator, select the Insight Display (LCD panel) USBMenu option.

How do I change administrator on board?

Onboard Administrator module replacement

1. Press the ejector button back.
2. Rotate the handle to the closed position under the ejector button.
3. Replace the blank (if installed).
4. Replace the module.

How do I get OA logs?

For the OA GUI select Enclosure Information – Enclosure Settings – Configuration Scripts. Select link for “Show All”. This includes the OA system log. If the OA is a bit old then the link is “Click Here…to view inventory.

How do I reset my onboard administrator c7000?

The Onboard Administrator (OA) has a reset button on the rear of the enclosure. It can also be reset through the OA Insight Display’s Enclosure Information screen. The servers can be reset through the OA or through the Integrated Lights-Out 2 (iLO 2).

How do I reset my HP blade server?

This is the easiest method.

1. Open the iLO web interface.
2. Enter iLO login-name and Password.
3. Click Diagnostics from the left menu.
4. Click the Reset button.
5. Click OK button in response to “Are you sure you want to reset iLO 2” message.
6. It may take 30-60 seconds for the iLO to reboot.

How do I collect all reports from OA show?

How to collect OA Show All report using OA GUI? Login to Onboard Administration GUI using a browser having java. Click on “SHOW ALL” which will generate the report on a new TAB of the browser.

How do I reset my c7000 OA?

Cold reset (reboot) of the enclosure: Disconnect and reconnect all power cables until there are no power cables attached, wait a few seconds, then reattach them. Alternatively, detach the power cable or use the power on/off button on the relevant PDUs, UPSes, and other power distribution devices.

How do I reboot my OA?

Warm reset (reboot) of the enclosure: The Onboard Administrator (OA) has a reset button on the rear of the enclosure. It can also be reset through the OA Insight Display’s Enclosure Information screen. The servers can be reset through the OA or through the Integrated Lights-Out 2 (iLO 2).