Is K-series faster than B Series?
“A bigger K-series motor is going to spool the turbo a little quicker,” says Laskey “But, a lot of the faster turbo cars tend to still be B-series motors.” The K series (left) has more material around the cylinder sleeves than the B series (right). This makes for a stronger block from the factory.
What’s the difference between B Series and K-series?
Similar to B series, the K-series car engines have two short blocks with the same design; the only difference between them being the deck height. Two versions of the Honda i-VTEC system can be found on a K-series engine, and both versions can come with variable timing control (VTC) on the intake cam.
Are all B Series transmissions interchangeable?
From what I have read and seen, all B-series transmissions are pretty much built the same except for minute differences. The one outstanding point are the synchros that may differ in each transmission. For example, a B16 tranny is an ITR tranny minus both the LSD and the superious synchros that are used.
Are all K-series interchangeable?
They are interchangeable. Again, the stock-type FWD is the most common.
How much horsepower can AB Series handle?
“In stock form, B series engines can range from 500 horsepower to 1,300 horsepower if it’s a fully built motor. Above that is beyond normal.
How much HP can a b18b1 handle?
Just go with forged internals. Properly tuned, stock sleeves can handle 500 whp.
What Hondas came with a B18?
B18B2
- Non-VTEC.
- Found in: 94-01 Integra RS/LS/SE/GS – DB7/DC4/DC3. 1994–2001Honda Integra “RS/LS/GS/SE/(GSI Australia)” (DC4/DB7) Displacement: 1.8 L; 111.9 cu in (1,834 cc) Compression: 9.2:1. Bore x Stroke: 81 mm × 89 mm (3.19 in × 3.50 in) Rod Length: 137.01 mm (5.394 in) Rod/Stroke Ratio: 1.56.
How much HP can stock B18 handle?
How much boost can a stock B18 handle? B18 internals can handle 300 hp when well tuned. you can run 12lbs, but get it tuned properly. u should reach 275 with 10 or so psi with that turbo.