What is a paint curing device?
The car is shown in the paint booth with the robot curing device. “This equipment allows the body shop to move things through the paint shop much faster and they’re cured completely once they leave the booth so your body shop manager or your technicians can put them back together without messing up the paint.
What is IR curing?
Infrared (IR) energy can be used as a source of heat to cure a variety of industrial coatings. Such infrared curing applies energy to the coated part surface by direct transmission from an IR emitter, which can provide source temperatures of anywhere from 500 to 4,200°F (Figure 7-2 – IRED 2010).
What is infrared paint used for?
Infrared Paint Curing Lamp, usually called IR, is used to cure paint during repainting in body shop. It speeds up the curing process to minimize the damage resulted from the curing environment.
How do you know if paint is cured?
To check if your paint is cured, use the fingernail test. In an inconspicuous area, press your fingernail into the coating. If it leaves an indent, your paint is not fully cured. If no indent is visible and the surface is hard, your paint has most likely cured.
How does near infrared curing equipment work?
The near-infrared thermal processing technology applies instantaneous power dynamics to the complete coating system, not just the surface. Such high energy densities achieve direct penetration into the coating layer while simultaneously heating the coating, allowing complete drying or curing within a few seconds.
Will infrared dry paint?
Unlike a forced air heater an infrared heating lamp heats objects it is aimed at. This means that even if the air temp in your garage isn’t as warm as you’d like; you can still paint and let it dry effectively. This is great for helping primers, paints, and clear coats dry more quickly during colder months.
How do infra red lamps dry the panel?
The convection method involves drying the paint by contacting the painted with heated air, with hot air moving to remove reducer vapor from the paint layer. With method of drying , hot air, acting on the outer layers of paint, forms a dense film on the surface.
What is infrared paint?
A two-layered paint that reflects infrared light while maintaining its colour could help keep buildings and vehicles cool under hot sun. It consists of a top layer of commercial paint, which provides the colour, and a bottom layer made of a polymer similar to Teflon, which reflects infrared light.
What is infrared curing lamp?
Short Wave IR is different from other curing methods in many ways. It dries and cures by penetrating through the wet coating and heating the layers underneath. Short Wave IR’s higher heating temperatures reduce cure times and improve quality. Features: Reduces curing times of ceramic coatings.
Does white paint reflect infrared?
White paints typically reflect only about 80% of visible light, and they still absorb ultraviolet (UV) and near-infrared (near-IR) rays, which warm buildings.
Which is the best infrared paint curing lamp?
Heatteck HT 2000 IR paint curing lamp are an environmentally friendly way to reduce energy claim and rise the effectiveness of your operations.Finally, you will get faster heating times without NOX, dust, soot, ozone, carbon monoxide or other toxicant issues.
Can a painting be cured in an infrared oven?
The infrared oven has to have its infrared waves directly come in contact with the coating surface to be cured. Limitations with Certain Coatings – If a coating is excessively reflective in nature it will sometimes not cure well using Infrared technology.
Do you need a convection oven to cure paint?
If you want to cure a coating but it doesn’t need high temperatures (above 200 degrees) you can incorporate a bake feature into your paint booth. To learn more about baking in a paint booth you can read about it here. An infrared or convection oven is a large expense .
Why do you need an Infrared drying lamp?
IR heat offers a greater fast dry times that are often ¼ to ⅒ the time needed when air-drying finishes. This technology is also cleaner. IR energy requires little to no air-flow, thereby minimizing deposits of contaminants in a finish.