How are spine arrows calculated?
Static spine is how much an arrow reacts when a 1.94 lb. weight is hung from the center of the arrow. To calculate this, arrows must be 29” long and supported at two points 28” apart. The number of inches the arrow bends multiplied by 1,000 is the arrow’s spine.
What spine arrow do I need?
Adding weight to the front of the arrow weakens its spine. That’s why Gold Tip recommends a 400 spine for a 27-inch arrow with a 100-grain point shot from a 60-pound bow, but also recommends a 340-spine arrow if its length and draw weight stay the same, but its point weighs 150 grains.
What does the arrow spine number mean?
The spine rating of an arrow is simply a measurement of its stiffness. The same Easton arrow comes in a variety of stiffness: the lower the number, the stiffer the arrow. For example, a 330 arrow is stiffer than a 500 spine arrow. So, a 500 arrow bends . 5-inches when the weight is applied.
What size arrow do I need for a 28 inch draw?
around 27 inches
If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.
What happens if my arrow is too long?
If you shoot an excessively long arrow, not only will the excess shaft weight result in a heavier and slower flying arrow, but the added length may necessitate changing to an even heavier/stiffer arrow spine.
What size arrow should I use?
The standard way to measure arrow length is from the back of the point to the throat of the nock. If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow.
How do I know my draw length?
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.