How do you replace a Chevy Lumina strut?
On the driver’s side, you can use a suitable pry bar. On this side, the half shaft inner joint has a groove where you can pry to separate the shaft from the transaxle. General Motors recommends installing a new half shaft nut and washer during the reinstallation process.
Do you need to replace both front struts?
It is similar to this question and this question, but the difference is this was not caused by normal wear-and-tear. The strut on the other side is perfectly fine and shouldn’t be in danger of failing anytime soon. Honestly, I think the answer will be the same. It might not be in danger of failing, but it is still more worn than a new one.
Do you replace brakes and suspension in pairs?
If the car has any value and you want to drive it for a while, you’re better off to replace them in pairs. Brakes and suspension should always be done in pairs.
How do you install a new strut on a car?
Installing a New Strut Install the completed strut assembly back into the steering knuckle. Replace the bolts, leaving them finger tight, allowing the assembly to move freely. Place the strut assembly back into the strut tower and replace the strut tower bolts.
On the driver’s side, you can use a suitable pry bar. On this side, the half shaft inner joint has a groove where you can pry to separate the shaft from the transaxle. General Motors recommends installing a new half shaft nut and washer during the reinstallation process.
When to replace struts on a Chevy Cobalt?
You do want to replace your struts in pairs, so replace the driver’s side and the passenger’s side at the same time. This is the same process for pretty much any ’05 to ’10 Cobalt, as well as the Pontiac G5.
What happens if you remove the center nut on a strut?
Do not remove the center nut or the strut will come apart and it is under high spring tension. Since you’ve removed the bolts from the steering knuckle, the strut might fall loose after you remove these bolts. It might help to have a partner holding onto the strut assembly while you loosen these bolts.