How do I reset my Buffalo AirStation router?
How to Hard Reset a Buffalo Router
- Press and hold the reset button at the back of the Buffalo router for 30 seconds.
- Disconnect the power from the router while continuing to hold down the reset button.
- Reconnect the power after five seconds.
- Continue to hold the reset button for 30 seconds.
What is Buffalo AirStation default password?
The default username is “admin” and the default password is “password”. Click the “Wireless” tile. Enter a new SSID for the 11n and/or the 11ac network, then click Apply.
How do I log into my router if I forgot the password?
If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.
How do I reset my Buffalo AirStation WZR 1750DHP?
To reset the Buffalo WZR-1750DHP to its default settings, you have to do the following steps:
- Switch on router.
- For at least 3 seconds, press the Reset button.
- Device is automatically restarted.
- Router has been reset to factory settings.
What is WB in router?
WB. – wireless bridge. 2Mode button. If the switch above is in the “AP” position, this button switches the AirStation between router and access point functionality. If the switch is in the “WB” position, the button has no effect.
How do you reset a Buffalo wireless router?
Reset Switch. Most Buffalo Inc. wireless router models have some sort of reset switch to return all parameters to factory default values. Models such as the AirStation WZR-1750DHP or WZR-1166DHP have a button on the bottom panel which, when pressed and held for about three seconds, initialize and reboot the router.
Where is the reset button on a Buffalo AirStation?
Models such as the AirStation WZR-1750DHP or WZR-1166DHP have a button on the bottom panel which, when pressed and held for about three seconds, initialize and reboot the router.
How do I access the configuration interface of the Airstation?
To access the AirStation’s advanced settings, use the web-based configuration interface. Connect the PC to the AirStation. Launch a web browser. Enter the AirStation’s IP address in the address field, then press the [Enter] key. If Router LED is off or no router LED, the AirStation is in Bridge Mode and the default IP is 192.168.11.100.
What’s the default user name on a Buffalo AirStation?
By default, this is usually 192.168.11.1 for Buffalo Inc. products, but may be different if you’ve changed the configuration. Enter the user name and password. These change by model or by user updates. Defaults to try are user name root and no password, or user name admin and password.