Why are the spongy brakes on my Silverado not working?
Spongy Brakes is more than likely air in the system. The pedal travel could be a self adjuster not working or air in the system. I forgot to mention that I did bleed the entire system and it made no difference. thanks for the reply.
What causes a soft brake pedal on a Chevy?
Soft or Spongy Brake Pedal: Too much air in the system due to improper bleeding is usually the cause of this problem. However, it can also be due to fluid loss or a low fluid level. Bleed the brake lines as recommended by Chevy to fix this. You could also have a ballooning brake hose when the brakes are applied.
Why are the brakes on my GM Truck not working?
This is a common problem on the GM trucks. The problem is with the pins that the caliper slides on and the fit of the pads in the caliper. Start by removing the pins and make sure they are clean and free of corrosion. Next check the fit of the pads in the caliper, the should slide easily.
What causes spongy brakes after a brake bleed?
Spongy brake pedal after a brake bleed is frustrating but you’re in the right place and we’ll get to the bottom of it in this post. The most common cause of spongy brakes after bleeding, is contaminated brake fluid. Usual contaminates include air or moisture in the system.
Why do I have spongy brake pedals on my Chevy Silverado?
If your truck has an antilock brake module in it, and that ABS module has air bubbles in it, you will have spongy squishy brake pedal feel even if your ABS system isn’t working. In my case, the brakes were so bad that the brake warning light came on.
Why does my abs not work on my Silverado?
Here is how to fix spongy brake pedal feel on a 1988 to 1998 Chevrolet Silverado truck. If your truck has an antilock brake module in it, and that ABS module has air bubbles in it, you will have spongy squishy brake pedal feel even if your ABS system isn’t working. In my case, the brakes were so bad that the brake warning light came on.
How do you know if your Chevy has a brake problem?
You will find the booster between the master cylinder and the firewall in your engine compartment. A check valve that is faulty can also let vacuum bleed out. You can diagnose this by starting your Chevy in order to build vacuum, and then turning it off for four or five minutes. Then you should try the brakes.
Why are my brake pads squealing on my Chevy?
Brake Squeal: A vibration between the pads and the calipers or the pads and the rotors can cause them to squeal. A brake pad that is semi-metallic will be noisier than a non-asbestos or ceramic pad. You should put new pads on your Chevy and replace or repair the rotors.