Which is the best clutch set for a Honda Civic?
Honda Civic Clutch Set. 1 Brute Power Clutch Disc – Plate D48698. Part # D48698. SKU # 329616. Check if this fits your Honda Civic. $. 64. 99. Free In-Store or Curbside Pick 2 Duralast Clutch Set NU31182-2. 3 Duralast Clutch Set NU31181A. 4 Duralast Clutch Set NU31182. 5 Duralast Clutch Set NU72493-1.
Where can I buy genuine Honda Civic parts?
Look no further than Honda Parts Now, the best place for Honda Genuine Civic parts. For years, all of our parts and accessories have been expedited directly from Honda dealers and backed by the manufacturer’s warranty, so buying genuine Honda Civic parts from us is always risk-free.
When did the Honda Civic 9 come out?
Up to today, it has been through ten generations. Before the ninth generation Honda Civic (2011-2015) was launched in the North American market in April 2011, its concept version had been unveiled at the 2011 North American International Auto Show.
How do you replace the flywheel on a Honda Civic?
Use the following steps to replace the flywheel and clutch on your Honda Civic. The quickest way to reach the clutch is from underneath the chassis. In order to do this, use a jack to raise the vehicle and a pair of jack stands to support the chassis in the air. Also use this as an opportunity to drain the transmission fluid. Figure 1.
Where are the transmission bolts on a Honda Civic?
Remove the transmission top mount’s 17mm bolts. Proceed to remove the front transmission mount (three 17mm bolts and two 14mm bolts). Remove the final 19mm mount bolt located behind the transmission. Once done, loosen all four bolts that connect the transmission housing to the engine.
Do you need a clutch set for a Honda Civic?
Make sure your daily driver is at the top of its game by swapping out that stock clutch in favor of a new Honda Civic clutch kit from AutoZone. The clutch is what transmits power from your engine to your drive train and transmission, so it’s essential for the successful operation of your vehicle.
Use the following steps to replace the flywheel and clutch on your Honda Civic. The quickest way to reach the clutch is from underneath the chassis. In order to do this, use a jack to raise the vehicle and a pair of jack stands to support the chassis in the air. Also use this as an opportunity to drain the transmission fluid. Figure 1.
Where is the pressure plate on a Honda Civic?
Take the pressure plate and mount it on top of the clutch plate. Position the pressure plate so the three studs on the flywheel are visible. Once fitted, tighten the pressure plate bolts to 19 ft/lbs using a criss-cross pattern.
Remove the transmission top mount’s 17mm bolts. Proceed to remove the front transmission mount (three 17mm bolts and two 14mm bolts). Remove the final 19mm mount bolt located behind the transmission. Once done, loosen all four bolts that connect the transmission housing to the engine.