What do I need to change alternator Honda Pilot?
You are going to need some tools. 1 – Belt tensioner tool with the 14 mm crows foot attachment. 2 – 10 mm, 12 mm, 13 mm 14 mm sockets of any drive size and the appropriate ratchet. DO NOT use the 14 mm crows foot as a replacement for the 14 mm socket.
Which is Honda Pilot Service and repair manual?
Nobili spiritus embiggens pequeño sparus tyre. 2003 to 2006 Honda Pilot service and repair manual in english and pdf document for maintenance, service and use the vehicle. Click to expand… Have you tried it?
How do you remove power steering from Honda Pilot?
To remove the power steering reservoir you need to free the latch from the stand it is on. To do this gently pry the tab at the top of the stand and then put your hand under the reservoir and lift straight up. If it fights, rinse and repeat on this step until the reservoir is free. Remove the cap from the reservoir.
What happens when you change the alternator on a Honda Pilot?
The battery failed internally in such a way that would duplicate removing the battery while the vehicle was running. This spikes the charging system and blows the regulator. When it does this it shorts the charging system creating a large draw. After some searching on the web I found lots of bad ways to do this job so I will show you how I did it.
What kind of service does a Honda Pilot need?
Recommended Service for Your 2006 Honda Pilot Recommendations for regular servicing tasks for your vehicle can be found in Service & Maintenance . Coverage and terms of your vehicle’s warranties, including general provisions, new vehicle limited warranty, emissions, tires and accessories warranties, replacement parts and more.
How long does it take to get a Honda Pilot manual?
Delivery time is approximately five weeks. To save paper and time, you can download the latest manuals now. Recommended Service for Your 2006 Honda Pilot Recommendations for regular servicing tasks for your vehicle can be found in Service & Maintenance .
To remove the power steering reservoir you need to free the latch from the stand it is on. To do this gently pry the tab at the top of the stand and then put your hand under the reservoir and lift straight up. If it fights, rinse and repeat on this step until the reservoir is free. Remove the cap from the reservoir.
What do you need to change an alternator?
Remove the main power cable from the alternator. The main power cable will be the thick cable attached to the alternator that runs from the battery. Depending on how much space you have in your specific vehicle, you may be able to use a ratchet, but in some, you may only be able to fit an open-ended wrench.
How do I loosen the bolts on my alternator?
Loosen the bolts on the alternator if there is no auto-tensioner. In cars without an auto-tensioner pulley, you can relieve the tension on the belt simply by loosening the two bolts that secure the alternator to the engine. These will often require a 14mm or 1⁄2 inch (1.3 cm) socket, though you may need to try others.
Do you need to remove serpentine belt to change alternator?
As you loosen the bolts, the alternator will slide in the bracket under the tension of the belt. You may not need to remove the serpentine or accessory belt if it’s not damaged.
You are going to need some tools. 1 – Belt tensioner tool with the 14 mm crows foot attachment. 2 – 10 mm, 12 mm, 13 mm 14 mm sockets of any drive size and the appropriate ratchet. DO NOT use the 14 mm crows foot as a replacement for the 14 mm socket.
Remove the main power cable from the alternator. The main power cable will be the thick cable attached to the alternator that runs from the battery. Depending on how much space you have in your specific vehicle, you may be able to use a ratchet, but in some, you may only be able to fit an open-ended wrench.
Loosen the bolts on the alternator if there is no auto-tensioner. In cars without an auto-tensioner pulley, you can relieve the tension on the belt simply by loosening the two bolts that secure the alternator to the engine. These will often require a 14mm or 1⁄2 inch (1.3 cm) socket, though you may need to try others.
What happens if you leave your alternator alone?
Your alternator supplies your car’s battery and auxiliary systems with electrical current, and a failed alternator left alone will eventually lead you with a dead battery, or a dead car on the side of the road. Keep reading to learn the signs of a damaged alternator and find out the general steps required for a DIY alternator replacement.