How do I enable Wake-on-LAN on MSI motherboard?

How do I enable Wake-on-LAN on MSI motherboard?

How to setup the Wake on LAN function?

1. Set “EUP 2013” as Disabled in the BIOS Power Management menu.
2. Enable “Resume By PCI or PCI-E Device” in the Wake Up Event Setup.
3. In Windows device manager, go to “Network adapters” -> “Power Management” tab, and checked in the boxes [Allow this device to wake the computer].

How do I enable Wake-on-LAN in BIOS?

To enable Wake-on-LAN in the BIOS:

1. Press F2 during boot to enter BIOS Setup.
2. Go to the Power menu.
3. Set Wake-on-LAN to Power On.
4. Press F10 to save and exit the BIOS Setup.

Does Wake on LAN work from shutdown?

Wake-on-LAN (WOL) allows a computer to be powered on or awakened from standby, hibernate or shutdown from another device on a network. The process of WOL is the following: The target computer is in standby, hibernate or shutdown, with power reserved for the network card.

Why Wake-on-LAN is not working?

WOL does not work when the system is running on battery. If there is no link light, then there is no way for the NIC to receive the magic packet to wake the system. Ensure that WOL is enabled in the BIOS under Power Management settings. Ensure that Deep Sleep is disabled in the BIOS (not applicable to all systems).

How do I know if Wake-on-LAN is enabled in BIOS?

How to Confirm That Wake on LAN Is Enabled in the Computer’s BIOS

1. Power down and then power on the computer.
2. Press the side arrows to navigate to the “Advanced” menu.
3. Press the down arrow until “Chipset Configuration” is highlighted and press “Enter.”

How do I wake on a LAN server?

Open Network settings and go to Network Adapters list. Select your LAN adapter and click on properties. In the Power management tab you will find options to allow Windows to wake/put to sleep the device and to enable Magic Packet.

How do I know if WOL is enabled?

1. Open the Device Manager, click Network adapters, right-click the Network Adapter to be WOL enabled, and click Properties.
2. Click the Link Speed tab then verify installation of Intel® PROSet/Wireless Software and verify it is the latest version.

Does Windows remote desktop support Wake-on-LAN?

Remote Desktop does not have any built-in remote wake-up capability. You will need to first use Wake-On-Lan to wake up the sleeping computer, before you can RDP to it. To enable WOL on your computer, the first step is to check the hardware : Your network card must support Wake-on-LAN.