How much horsepower does a Farmall 560 diesel have?
between 57-61 HP
The Farmall 560 had between 57-61 HP depending on fuel.
How much horsepower does a 560 have?
Farmall 560
| Farmall 560 Power | |
|---|---|
| Drawbar (claimed): | 54.8 hp 40.9 kW |
| PTO (claimed): | 59.48 hp 44.4 kW |
| Plows: | 5 |
| Drawbar (tested): | 53.12 hp 39.6 kW |
How many horsepower is an International 560 tractor?
International Harvester 560
| International Harvester 560 Power | |
|---|---|
| Engine: | 72.5 hp 54.1 kW |
| Drawbar (claimed): | 54.8 hp 40.9 kW |
| PTO (claimed): | 59.48 hp 44.4 kW |
| Plows: | 5 |
What year did the Farmall 560 come out?
The Farmall 560 is a five-plow row crop tractor produced from 1958 to 1963. Successor to the Farmall 450 series, it was part of the line of large tractors originating with the Farmall M.
What years were Farmall 560?
How much does a Farmall 560 weigh?
| Farmall 560 | |
|---|---|
| Weight | 6,563 pounds (2,977 kg) (gasoline), 6,785 pounds (3,078 kg) (diesel) |
| Propulsion | Rear wheels |
| Engine model | International Harvester C263 (gasoline and LP), International Harvester D282 (diesel) |
| Gross power | 66 horsepower (49 kW) |
What year was the Farmall 560 made?
| Farmall 560 | |
|---|---|
| Manufacturer | International Harvester |
| Production | 1958-1963 |
| Length | 141 inches (360 cm) |
| Width | 85 inches (220 cm) (minimum) to 107 inches (270 cm) (maximum) |
Is the Farmall 560 still a good tractor?
At the end of the day, the Farmall 560 was – and still is – a great tractor. Dealerships fixed the tractors with issues, and Harvester implemented those fixes on the assembly line as well. If you’ve got a 560 today and it runs and drives, you’ve got nothing to worry about.
When was the first recall of a Farmall tractor?
They say that bad news travels at the speed of light, and in 1959, International Harvester found that out the hard way with the Farmall 560. It resulted in one of the first major tractor recalls in history! That said, this particular tractor doesn’t have anything wrong with it.
What causes a Farmall 560 to go Kablooey?
The extra power from the new motor accelerated bearing wear in the bull gear assembly. Basically the ball bearings deteriorated enough that they fell out of the cage and jammed in between the bull gear and the cast rear end housing. At that point, the housing would go kablooey!
What are the specs of a Farmall row crop tractor?
The cylinder bore is 90.0 mm (3.54 in) and the piston stroke is 112.0 mm (4.41 in). The compression ratio rating is 7.2:1 for the gasoilne version or 8.7:1 for the LP-gas version. This engine produced 60.4 PS (44.4 kW; 59.5 HP) PTO of output power.