Can you get extension hoses for washing machines?
You can buy supply hoses in lengths up to 96 inches, which you can attach to your existing hoses with 3/4-inch hose thread connectors. Lengthening the drain hose isn’t difficult, because you can buy a drain hose extension that simply clamps onto the end of your existing hose.
Can you connect 2 washing machine hoses together?
Washing machines use a pair of hoses for the hot and cold water connections to the main plumbing lines in the laundry room. Hooking up two washing machine hoses to create a longer hose connection requires a coupler available at appliance repair stores and gardening centers.
How far can washing machine be from sink?
The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).
Are washing machine hoses Universal?
All washing machines should use standard sizes and fittings. You will always get new fill hoses with a new washing machine.
How long can you extend a washing machine drain hose?
We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length. Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches).
How far can you extend a washing machine waste hose?
The longest hose you can get is 2.5m. If this is still too short it might be a case of looking to extend the copper feed to washing machine connector then attach the hose on. This is a job that can be done.
How do you route a washing machine drain hose?
Reach around to the back of the washer with the measuring tape or yard stick. Leave the machine in its current position. Measure the maximum height of the discharge hose, at the arch, from the floor where it terminates into the standpipe in the floor, nearby laundry sink or recessed drain in the wall.
Do washing machine hoses come in different lengths?
Length. Washing machine hoses vary in length from about 3 feet to 12 feet. When choosing an appropriate length for a hose, include a few extra inches of slack. If possible, it’s recommended that the main water supply pipes (which are probably durable copper) are extended closer to the washing machine.
Are all washing machine water hoses the same?
All washing machines should use standard sizes and fittings. You will always get new fill hoses with a new washing machine. If it isn’t too much trouble, it makes sense to use the new hoses if possible unless you are happy that the existing hoses are still in excellent condition.
Are all washing machine drain hoses the same size?
The drain hose is available in different lengths, and universal sizes are 1 to 1¼ inches in diameter. The length of the drain hose depends on how far the washer is from the stand pipe or laundry sink.