Where is the ground cable on a car battery?
The ground is the heavy cable, normally color coded black, that attaches to the negative terminal of the battery. Anytime you are doing car work that involves electrical components, you should disconnect the ground cable from the battery first. With the ground removed, there is no way an electrical circuit can be completed by accident.
What should I do when I change battery cable?
Make sure not to let the new cables come into contact with the battery terminals as you return it, as that could result in you receiving a shock. If the terminals on the battery appear to be oxidized or rusted, use a steel tooth brush to clean off the connection area before you place the battery back into the car.
Where do the positive and negative battery cables go?
Negative cables bolt directly to the body of the car or engine block, positive cables attach to the starter. The battery will have labels marked with a + and a – sign. The plus is the positive cable terminal, the – is the negative.
How can I tell if my ground connection is bad?
Testing the Ground. The simplest way to check for a bad ground is to run a continuity test between the battery and the chassis. Disconnect the negative battery cable and connect the probe ends of a digital multimeter — set to read volts DC — to the negative and positive battery terminals.
The ground is the heavy cable, normally color coded black, that attaches to the negative terminal of the battery. Anytime you are doing car work that involves electrical components, you should disconnect the ground cable from the battery first. With the ground removed, there is no way an electrical circuit can be completed by accident.
How do you change the battery cable on a car?
Run the new positive cable back through the engine bay in the same way the old one was. Attach the negative cable to the body or block. Locate the hole the old negative cable was attached to and use the same bolt to connect the new cable.
Where do you find the negative battery cable?
The negative battery terminal is usually identified by a black battery cable, or by a negative sign marked on the terminal. Disconnect the negative terminal and set the cable out of the way. Step 3: Remove the positive terminal.
Where is the lead from the battery to the ground?
While you near the battery……….follow the Black wire fomr the right headlight bulb socket. A few inches away from the socket, in the harness, 4 black ground wires are crimped together. Mine were corroded.