How do you get windshield wipers to work on Honda Civic?
Open the hood and use a 14mm socket and ratchet to remove the cap nuts. Then, remove the wiper arms and do not let them touch the hood. Use a small flat head screwdriver to remove the screws holding the cowl in place. You will gain access to the wiper motor assembly.
What to do if your windshield wipers are not working?
However, you may need to troubleshoot the motor if you are experiencing problems with your windshield wipers to verify that the motor is actually the problem. Open the fuse panel box in the passenger compartment.
Where is the wiper motor on a Honda?
Open the hood and locate the wiper motor. It will be located on the passenger side of the engine bay, and will be bolted to the firewall near the cowl. The motor looks like a long cylindrical canister and may be mounted at a 45-degree angle towards the driver’s side.
How do you remove a fuse from a wiper motor?
You may need to push two retaining tabs together and pull down on the fuse panel cover, or turn the release knob counterclockwise and pull down to open the cover. Take the fuse puller from the panel cover and grab the head of the fuse for the wiper motor with the fuse puller teeth.
Is there a problem with my Honda Civic wiper?
The Honda-Tech community reports that 1992 to 2000 Civic model years have three most common flaws in the windshield wiper assembly. A problem could be caused by either the combination switch, the wiper arm ball joints, or the actual wiper motor. This article will describe how to investigate each.
However, you may need to troubleshoot the motor if you are experiencing problems with your windshield wipers to verify that the motor is actually the problem. Open the fuse panel box in the passenger compartment.
Open the hood and locate the wiper motor. It will be located on the passenger side of the engine bay, and will be bolted to the firewall near the cowl. The motor looks like a long cylindrical canister and may be mounted at a 45-degree angle towards the driver’s side.
Do you need to disable windshield wiper combination switch in Honda Accord?
Windshield wiper combination switch for a Honda Accord. Disable the supplemental restraint system (SRS) airbag before testing the components related to the steering wheel or steering column. Improper wiring may activate the airbag, causing major harm.