How do I check my hard drive temperature in Ubuntu?
Open a terminal in your Ubuntu based system and install the following. The hddtemp utility gives you the temperature of your optical hard disk drive as well as SSD (as per my test). And the lm-sensors package gives you temperature details from the CPUs and other sensors accessed via PCI ports.
How do I find my hard drive temperature?
To find out the hard drive current temperature, use these steps:
- Open Settings on Windows 10.
- Click on System.
- Click on Storage.
- Under the “More storage settings” section, click the Manage Disks and Volumes option.
- Select the drive you want to know its temperature.
- Click the Properties button.
What is normal HDD temperature?
between 0 °C to 60°C
Most hard drive manufacturers specify a normal operating temperature between 0 °C to 60°C (32°F to 140°F).
How do I run Smartmontools on Linux?
Setting up
- You can install the smartmontools package from the Synaptic Package Manager (see SynapticHowto), or by typing the following into the terminal: sudo apt-get install smartmontools.
- To ensure that your drive supports SMART, type: sudo smartctl -i /dev/sda.
How do I find my NVMe temperature?
Linux find NVMe SSD temperature command
- Open the terminal application.
- Install nvme-cli tool on Linux using your package manager.
- Run sudo nvme smart-log /dev/nvme0 Linux command to display temperature information for NVMe SSD.
How do I check my hard drive temperature Linux?
Steps to view harddrive temperature in Linux:
- Launch a terminal application.
- Install hddtemp utility. $ sudo apt update && sudo apt install –assume-yes hddtemp.
- Start hddtemp service.
- Configure hddtemp service to automatically start during system boot.
- View available disk drives.
- View temperature of selected disk drive.
How do I check my hard drive temperature in Linux?
The hddtemp or smartctl utility will give you the temperature of your hard drive by reading data from S.M.A.R.T. on drives that support this feature. Only modern hard drives have a temperature sensor.
How do I check my SSD temp in Ubuntu?
The procedure to show NVMe SSD temperature on Linux is as follows:
- Open the terminal application.
- Install nvme-cli tool on Linux using your package manager.
- Run sudo nvme smart-log /dev/nvme0 Linux command to display temperature information for NVMe SSD.
Is 50 degrees Celsius hot for a HDD?
Hard disk temperatures higher than 45°C led to higher failure rates….What is a Safe Hard Disk Temperature Range?
| Hard Disk Temperature | |
|---|---|
| 25°C to 40°C: | Ideal |
| 41°C to 50°C: | Acceptable |
| More than 50°C: | Too hot |
Is 40c OK for HDD?
A temperature of around 40 C is perfect for a HDD.
How long does Smartctl long test take?
Smartctl said the long test would take about 12 hours, however when testing my 6TB WD Reds the initial “long” test would only take about 7 minutes.
What is Smartctl command?
smartctl is a command line utility designed to perform SMART tasks such as printing the SMART self-test and error logs, enabling and disabling SMART automatic testing, and initiating device self-tests.
What is the purpose of smartctl in Ubuntu?
The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests. smartctl also supports some features not related to SMART.
Is there standard way to get drive temperature on Linux?
So, is there a standard way to get the drive temperature on Linux (HDD or SSD)? If not, what (other) tools can I use to get this information? I like hddtemp, which provides a pretty standard way of getting the temperature for supported devices. It requires SMART support though.
How to install hddtemp on Ubuntu Linux command line?
To install hddtemp on a a Debian / Ubuntu Linux use apt-get command / apt command: $ sudo apt-get install hddtemp
Can a smartctl be used on a SCSI drive?
This version of smartctl is compatible with ACS-3, ACS-2, ATA8-ACS, ATA/ATAPI-7 and earlier standards (see REFERENCES below). smartctl also provides support for polling TapeAlert messages from SCSI tape drives and changers. The user must specify the device to be controlled or interrogated as the final argument to smartctl.